Decoplast® Decolastic Top Coat
- Chemical Family
- Acrylics & Acrylates
Decoplast® Decolastic Top Coat is an elastomeric, acrylic-based, decorative coating that weatherproofs and bridges hairline cracks. Use it for protecting prepared vertical concrete, stucco, EIFS, masonry, or previously acrylic coated smooth/textured surfaces. Its smooth finish is sprayed or roller applied.
Other characteristics
- Brand
- Decoplast
- Features
Breathable, Excellent Flexibility, Good Adhesion, Good Color Stability, Good UV Protection, Good Weather Stability, Low VOC, Non-Toxic; Acrylic Based; Flexible; Weather Proof; Non Vapor Barrie; Water-Based; Low VOC
- Product Type
- Elastomeric Coating, Top Coat
- Elastomeric Coating
- Top Coat
- Application Method
- Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Masonry
- Mixing
Mix with a clean, rust-free electric drill and paddle to a uniform consistency. Close container when not in use. Clean tools with water immediately after use.
- Markets
- Building & Construction
- Storage
Store off the ground in a cool/dry area. Protect from extreme heat [90ºF (32ºC)], moisture and direct sunlight.
- Benefits
Excellent adhesion; internal flexibility; weather-resistant; color stability.; Bridges hairline cracks.; Repels water; hot/cool temperature stability; protects against ultraviolet light.; Allows substrate to breathe naturally.; Safe, non-toxic; cleans up with water.; Safe for workers and the environment.
- Coverage
590-690 ft² (49-58 m²) per pail for a single coat, applied at 12-14 mils (0.3 to 0.36 mm), wet to achieve 8.4 - 10.8 mils DFT per coat.. 295-345 ft² (25-29 m²) per pail for two coats, applied at 12-14 mils (0.3 to 0.36 mm) per coat, wet to achieve 8.4 - 10.8 mils DFT per coat.
- PACKAGING
- 5 gal pail (19L) 52.5 lbs / 23.8 kg per pail.
- Shelf LIfe
- 24 months, if properly sealed and stored.
- Limitations
Use Decolastic Top Coat only when surface and ambient temperatures are above 40°F (4°C) and below 100°F (38°C) during application and drying period.; Store Decoplast materials in a cool, dry place.; Sloped surfaces: Refer to Decoplast details.; Decolastic Top Coat should not be used on weather-exposed horizontal or below grade surfaces or where immersion in water may occur.; Do not apply Decolastic Top Coat to frozen surfaces.; Do not overcoat with solvent-based materials.
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion (Concrete) | 345.0 | psi | ASTM D-4541 |
| Elongation at Break | 450.0 | % | ASTM D-412 |
| Flexibility, Mandrel Bend, Elongation (-14°F, No Crack) | min. 32 | % | ASTM D-522 |
| Flexibility, Mandrel Bend, Elongation (70°F, No Crack) | min. 32 | % | ASTM D-522 |
| Moisture Resistance (14 Days Exposure) | No Deterioration | — | ASTM D-2247 |
| Mold Resistance (90 Days Exposure) | Pass, No Mold Growth | — | ASTM D-3273 |
| Tensile Strength | 290.0 | psi | ASTM D-412 |
