Decoplast® Decolastic 250 Hybrid Acrylic Elastomeric Textured Finish
- Chemical Family
- Acrylics & Acrylates
Decoplast® Decolastic 250 Hybrid Acrylic Elastomeric Textured Finish is a water based textured coatings formulated to provide a tough, durable, flexible, and breathable coating . It is used as decorative wall finish over concrete, masonry, stucco, and EIFS.
Product families
- EIFS & Insulation
Other characteristics
- Brand
- Decoplast
- Features
Breathable, Excellent Flexibility, Good Adhesion, High Durability, Non-Toxic; Elastomeric; Acrylic-Based; Ready-Mixed; Water-Based
- Product Type
Elastomeric Coating, Top Coat, Waterborne Coating; Elastomeric Coating; Top Coat; Waterborne Coating
- Application Method
- Brush, Spray, Trowel
- Compatible Substrates & Surfaces
- Concrete, Masonry
- Mixing
Mix with a clean, rust-free electric drill and paddle to a uniform consistency. A small amount of clean water may be added to aid workability. Limit addition of water to amount needed to achieve the finish texture. Additives are not permitted. Close container when not in use. Clean tools with water immediately after use.
- Markets
- Building & Construction
- Storage
Store off the ground in a cool/dry area. Protect from extreme heat [90ºF (32ºC)], moisture and direct sunlight.
- Benefits
Bridges hairline cracks.; Excellent adhesion.; Ready to use on site; no additional additives needed.; Safe, non-toxic; cleans up with water.
- PACKAGING
- 5 gal pail (19L) 68.5 lbs / 31 kg per pail
- Shelf LIfe
- 24 months, if properly sealed and stored.
- Limitations
Use Decolastic 250 Textured Finishes only when surface and ambient temperatures are above 45°F (4°C) and below 100°F (38°C) during application and drying period.; Store Decoplast materials in a cool, dry place.; Sloped surfaces: Refer to Decoplast details.; Decolastic 250 Textured Finishes should not be used on weather-exposed horizontal or below grade surfaces or where immersion in water may occur.; Do not apply Decolastic 250 Textured Finish to frozen surfaces.
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Accelerated Weathering (2000 hours) | No Deleterious Effects | — | ASTM G-154 |
| Adhesion (Concrete, 28 days) | min. 105 | psi | ASTM D-4541 |
| Adhesion (Stucco, 28 days) | min. 80 | psi | ASTM D-4541 |
| Flexibility (1/8" Mandrel Bend) | Pass | — | ASTM D-522 |
| Freeze/Thaw Resistance (60 Cycles) | Pass; No Deleterious Effects | — | ASTM 2485 |
| Surface Burning (min. 450 Smoke Developed) | Pass | — | ASTM E-84 |
| Surface Burning (min.25 Flame Spread) | Pass | — | ASTM E-84 |
| Water Vapor Transmission (ICC Vapor Permeability) | Pass | — | ASTM E-96 |
