Tique Marmomix Finish
- Chemical Family
- Acrylics & Acrylates
Tique Marmomix Finish is a ready-mixed, acrylic-based exterior or interior decorative and protective wall finish. Marmomix Finish is designed to replicate the appearance of true natural stone. It is intended for use over properly prepared vertical above grade concrete, concrete masonry, Portland cement plaster, stucco and Tique continuous insulation systems.
Product families
- Concrete Coatings & Stains
Other characteristics
- Brand
- Tique
- Features
Abrasion Resistant, Good Adhesion, High Air Permeability, High Durability, Non-Toxic; Ready-Mixed; Pure acrylic; Water-Based; Vapor permeable; Quartz aggregate
- Product Type
- Top Coat, Waterborne Coating
- Top Coat
- Waterborne Coating
- Mixing
Mix with a clean, rust-free electric drill and paddle to a uniform consistency. Close container when not in use. Clean tools with water immediately after use.
- Markets
- Paints & Coatings
- Storage
Store off the ground in a cool/dry area. Protect from extreme heat [90ºF (32ºC)], moisture and direct sunlight.
- Benefits
Ready to use on site; no additional additives needed.; Excellent adhesion.; Safe, non-toxic; cleans up with water.; Allows substrate to breathe naturally.; Durable; resists abrasion.
- PACKAGING
- 5 gal pail (19L) 68.5 lbs / 31.2 kg
- Shelf LIfe
- 24 months, if properly sealed and stored.
- Limitations
Tique Marmomix Finish shall be applied at a minimum thickness of 1/16 in (1.6 mm) but not greater than 1/8 in (3.2 mm) per coat.; Use Tique Marmomix Finish only when surface and ambient temperatures are above 40°F (4°C) and below 100°F (38°C) during application and drying period.; Store Tique materials in a cool, dry place.; Sloped surfaces: Refer to Tique details.; Tique Marmomix Finish should not be used on weather-exposed horizontal or below grade surfaces or where immersion in water may occur.; Do not apply Tique Marmomix Finish to frozen surfaces.
- Availability
- Fine / Medium
- 20 Standard Colors / Custom Colors
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Method |
|---|---|---|
| Accelerated Weathering (2000 hours) | Pass | ASTM G-154 |
| Mildew Resistance (28 days; No Growth) | Pass | ASTM D-3273 |
| Surface Burning (min. 450 Smoke Developed) | Pass | ASTM E-84 |
| Surface Burning (min.25 Flame Spread) | Pass | ASTM E-84 |
| Water Resistance (14 days) | Pass, No Deleterious Effects | ASTM D-2247 |
| Water Vapor Transmission (U.S. perms, ICC Vapor Permeable) | Pass | ASTM E-96 |
