Decoplast® Decoseal
- Chemical Family
- Acrylics & Acrylates
Decoplast® Decoseal is a 100% acrylic formulated clear coat sealer with either a Matte or Gloss finish. It dries to a clear appearance, reduces dirt pickup resistance and cleans up easily with water. It provides a surface barrier to resist UV, acid rain and other environmental pollutants. It improves the water and freeze thaw resistant of porous exterior surfaces by lowering water absorption.
Other characteristics
- Brand
- Decoplast
- Features
Abrasion Resistant, Breathable, Excellent Dirt Pick-up Resistance, Freeze/Thaw Stability, High Gloss, Low VOC, Matte Finish, Non-Toxic, UV Resistant; Dries to a clear appearance.; Ready-Mixed; Low VOC; Water-Based; Vapor permeable; Abrasion/Mar resistant; Dirt Pickup Resistant
- Product Type
Sealer, Solventless & High Solids Coating, Waterborne Coating; Sealer; Solventless & High Solids Coating; Waterborne Coating
- Application Method
- Roller
- Mixing
Mix with a clean, rust-free electric drill and paddle to a uniform consistency. Close container when not in use. Clean tools with water immediately after use.
- Storage
DecoSeal must be stored at a minimum of 50ºF (10ºC) in tightly sealed containers protected from weather and out of direct sunlight.
- Benefits
Ready to use on site; no additional additives needed.; Environmentally safe.; 100% acrylic, safe, non-toxic; cleans up with water.; Allows substrate to breathe naturally.; Increased abrasion resistance.; Stays cleaner longer.
- Coverage
Coverage depends on the texture and porosity of the surface/substrate. For sealing new applications, the coverage is approximately 1200-1600 ft 2 per pail.
- PACKAGING
- 5 gal pail (19L) 40 lbs. / 18 kg per pail
- Compliance
This product complies with US EPA (40 CFR 59) and South Coast AQMD (Rule 1113) VOC emission standards for architectural coatings.
- Shelf LIfe
2 years from date of manufacture when properly sealed and stored.
- Limitations
Use DecoSeal only when surface and ambient temperatures are above 40°F (4°C) and below 100°F (38°C) during application and drying period.; Re-Sealing may be required based on exposure to extreme elements.; Not intended for substrates exposed to hydrostatic pressure, periodic or continuous water immersion; Store Decoplast materials in a cool, dry place.; Sloped surfaces: Refer to Decoplast details.; DecoSeal should not be used on weather-exposed horizontal or below grade surfaces or where immersion in water may occur.; Do not apply DecoSeal to frozen surfaces.
- Availability
- Available in Matte or Gloss finish.
- Technology
- Ready-to-Use Products
- Packaging Type
- Pails
Technical data
Table 1 of 1
1 row| Characteristic | Value | Unit |
|---|---|---|
| Volatile Organic Compounds | max. 50 | g/l |
