Decoplast® Acryl DP 600
- Chemical Family
- Acrylics & Acrylates
Decoplast® Acryl DP 600 is an acrylic polymer emulsion which enhances the adhesion, workability, physical properties such as compressive and flexural strength, and durability of Portland cement mortars, plaster, stucco, and concrete mixes.
Product families
- Concrete Admixtures
Other characteristics
- Brand
- Decoplast
- Features
Chemical Resistant, Freeze/Thaw Stability, Good Adhesion, Good Compressive Strength, Good Flexural Modulus, Good Tensile Properties, High Durability, Improves Physical Properties, Solventless, UV Resistant
- Product Type
- Concrete Admixture
- Markets
- Building & Construction
- Clean Up
Use fresh water to clean tools and equipment before product dries.
- Coverage
Varies depending upon Portland cement plaster or stucco mix. As a bonding agent approximately 200-300 ft 2 per gallon (19-28 m2 per 3.8L) depending on substrate porosity.
- PACKAGING
- 42 lb. (19.1 kg.) 5-Gallon plastic pail.
- Shelf LIfe
1 year in unopened tightly sealed pails out of direct sunlight at 40°-100°F (4.4°-38°C).
- Limitations
Protect from freezing. Do not store or apply in temperatures over 110°F (37.5°C) or below 38°F (13°C). Material that freezes may cause poor performance of the product. Protect all work from inclement weather until fully cured. Weather conditions can and will affect drying time and workability. Do not apply stucco or cementitious coatings to the modified material without the use of an approved bonding agent or being acrylic enhanced. Do not use with air entrained or expansive cements. Hydrated lime additions may cause excessive foaming.
- Applications
Building & Construction — Other Building & Construction Applications
- Instructions
Recommended Use Ratios:; Application:; Mixing; Blend water and ACRYL DP 600 Admix in a clean container in the proportions described above.; Add admix water blend to the dry product gradually until a uniform consistency is obtained.; Do not over mix.; Apply evenly using a brush, roller, or spray equipment. Extremely porous surfaces may require a second coat.; Apply base coat, concrete, or mortar while bonding agent is till tacky or up to 1 hour after application for best results.
- Technology
- Ready-to-Use Products
- HIGHLIGHTS
Acrylic polymer significantly improves adhesion, cohesion, reduces cracking, tensile, compressive, and flexural strengths of cement-based material.; Improves freeze thaw stability and reduces efflorescence in Portland cement-based material.; Excellent UV and chemical resistance.; With Portland cement plaster as a repair and patching mortar in vertical applications.; As a bonding agent over concrete and masonry surfaces to improve adhesion and reduce suction.; 100% acrylic formulation
- Surface Preparation
The substrate must be structurally sound, clean, free from oil, grease salts, form release agents, or any other material that could inhibit the material from bonding.
- Ready to Use Product Features
- Chemical Resistant
- Freeze/Thaw Stability
- Good Adhesion
- Good Compressive Strength
- Good Flexural Modulus
- Good Tensile Properties
- High Durability
- Improves Physical Properties
- Compatible Substrates and Surfaces
- Concrete
- Masonry
