Tique Liquid Basecoat/adhesive
- Chemical Family
- Acrylics & Acrylates
Tique Liquid Base Coat / Adhesive is a 100% acrylic polymer used as an adhesive and base coat combined with Portland Cement. Liquid Base Coat / Adhesive is used in the Tique Continuous Insulation Systems. It is a two component product.
Other characteristics
- Brand
- Tique
- Features
Excellent Productivity, Freeze/Thaw Stability, Good Adhesion, High Durability; Polymer-modified.; Smooth Consistency.; Vapor Permeable.
- Product Type
2K (2 component) Adhesive, 2K (2 component) Coating, Base Coat
- Application Method
- Trowel
- Compatible Substrates & Surfaces
Concrete, Expanded Polystyrene (EPS), Masonry, Plastics
- Mixing
Mix equal parts of Tique Liquid Base Coat / Adhesive to Type I/ II Portland cement by weight. Mix with a clean, rust-free electric drill and paddle. Allow to set approximately five minutes, adjust mix if necessary by adding up to 8 fl. oz. (0.24 L) of water, and remix to a uniform consistency. Avoid retempering after mixing of product.
- Markets
- Building & Construction
- Storage
Store off the ground in a dry area. Protect from extreme heat [90ºF (32ºC)], moisture and direct sunlight.
- Benefits
Excellent adhesion; increases durability and freeze/thaw resistance.; Trowels on easily; increases productivity.; Use as an adhesive, base coat and leveling coat.
- PACKAGING
- 5 gal. (19L) pail 62.5 lbs / 28.4 kg per pail
- Shelf LIfe
24 months, if unopened, properly stored and protected from moisture.
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion (Concrete Block, 28 days) | min. 60 | psi | ASTM C-297 |
| Adhesion (Dens-Glass® Gold, 28 days) | min. 25 | psi | ASTM C-297 |
| Adhesion (EPS Board, 28 days) | min. 15 | psi | ASTM C-297 |
| Adhesion (Gypsum Sheathing, 28 days) | min. 20 | psi | ASTM C-297 |
| Flame Propogation | Pass; UL Certified | — | NFPA-285 |
| Surface Burning (min. 450 Smoke Developed) | Pass | — | ASTM E-84 |
| Surface Burning (min.25 Flame Spread) | Pass | — | ASTM E-84 |
