Permacoat 3000

Product families

Other characteristics

Brand

Permacoat

Features

Anti-Slip, Chemical Resistant, Cost Effective, Odorless, Rapid Cure Response, Skid Resistant; PERMACOAT 3000 allows for a fast, easy application.; It also offers chemical resistance and physical performance much higher than those found in paints and other thin mil coatings.; At 30-50 mils, PERMACOAT 3000 provides excellent chemical resistance for splash and spill exposures. In addition, when applied at 50-80 mils, it can often be recommended for containment service.; Rapid cure resulting in minimal downtime.; Odor free; Non-skid safety finish optional.

Show in full

Product Type

2K (2 component) Coating, Epoxy Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Epoxy Coating; Solventless & High Solids Coating

Application Area

• Food Processing, Pulp And Paper Mills
• Food Processing
• Pulp And Paper Mills

Application Method

Roller, Wipe

Compatible Substrates & Surfaces

Concrete, Metal, Steel, Wood

Mixing

Prior to application of PERMACOAT 3000, the resin, hardener and substrate should be between 70°F and 95°F. Premix the Resin (Part A) for 30 seconds using a Jiffler mixer blade attached to a 500 - 750 RPM drill.. Add the Hardener (Part B) only when the batch is ready to be applied. Mix for approximately 90 - 120 seconds. After mixing, pour immediately onto the floor.

Show in full

Safety

PERMACOAT 3000 contains blended epoxies as the resin and blended Amines as the hardener. Protective clothing and gloves are recommended to prevent sensitization to these materials. In case of ingestion or eye contact, it is advisable to contact a physician immediately.

Markets

• Building & Construction
• Industrial

Clean Up

All mixing and application equipment should be cleaned immediately after use. If this is done, soap and water or biodegradable cleaners can be used. If the material has begun to set, more aggressive solvents will be necessary.

Coverage

Application thickness may vary from 30 - 80 mils, depending on the expected service conditions. Factors to consider are length of chemical exposure, mechanical abuses and substrate texture.

Cure Time Cycle

The cure time of PERMACoat 3000 and other resinous systems are very dependent upon the temperature of the substrate. The chart below represents the approximate times for the respective service conditions, following the last coat:

Function

PERMACOAT 3000 is designed as a medium duty (30 - 80 mils) floor coating and/or secondary containment system where moderate mechanical abuse and chemical exposure are anticipated. PERMACOAT 3000 can be installed over most sound floors, including old or new concrete, steel and wood, providing a cost-effective alternative to high-build floor toppings.

Show in full

PACKAGING

PERMACOAT 3000 is packaged in one and three gallon units. Each unit consists of pre-measured components, Part A (Resin) and Part B (Hardener).

Maintenance

For systems designed for splash and spill exposures, routine wash downs are recommended to reduce the length of chemical exposure. This step is not necessary where the product is recommended for containment service.

Technology

Ready-to-Use Products

Labeling Claims

• Odor-free
• VOC-free

Application Methods

• Roller
• Wipe