Permacoat 3000 XCT
- Chemical Family
- Epoxy & Epoxy Derivatives
PERMACOAT 3000 XCT is a 100% solids epoxy floor coating designed for cold applications between 32 - 45 °F. The PERMACOAT 3000 XCT system is applied as a two or three coat (30 - 90 mils) flooring material incorporating a broadcast of various blends of graded silica between coats. The system consists of two components, resin and hardener, in both horizontal and vertical formulations. Application of PERMACOAT 3000 XCT is accomplished with rubber squeegees and short nap paint rollers.
Product families
Applications
- Floor Coatings
Product Families
- Top Coats
Other characteristics
- Brand
- Permacoat
- Features
Chemical Resistant, Low Odor, Low Temperature Performance, Rapid Cure Response, Skid Resistant; PERMACOAT 3000 XCT allows for fast, easy applications at temperatures as low as 32°F.; In addition, the system provides chemical resistance and physical performace much higher than those found in paints and many other thin mil coatings.; Rapid cure, resulting in minimal downtime.; Very low odor.; Non-skid safety finish.
- Product Type
2K (2 component) Coating, Epoxy Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Epoxy Coating; Solventless & High Solids Coating
- Application Method
- Roller, Wipe
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel, Wood
- Mixing
Prior to application of the PERMACOAT 3000 XCT system the resin, hardener, silica and substrate should be between 32°F and 45°F. Premix the Resin (Part A) for 30 seconds using a Jiffler mixer blade attached to a 500 - 750 RPM drill. Add the Hardener (Part B) only when the batch is ready to be applied. Mix for approx. 90 - 120 seconds. After mixing pour immediately onto the floor.
- Safety
PERMATEC 3000 XCT contains blended epoxies as the resin and blended Amines as the hardener. Protective clothing and gloves are recommended to prevent sensitization to these materials. In case of ingestion or eye contact, it is advisable to contact a physician immediately.
- Markets
- Building & Construction
- Clean Up
All mixing and application equipment should be cleaned immediately after use. If this is done, soap and water, or bio-degradable cleaners can be used. If the material has begun to set, more aggressive solvents will be necessary.
- Function
The PERMACOAT 3000 XCT system is designed as a medium duty (30 - 90 mils) floor coating and/or secondary containment system where moderate mechanical abuse and chemical exposures are anticipated. PERMACOAT 3000 XCT can be installed over most sound substrates including old or new concrete, steel and wood. PERMACOAT 3000 XCT provides a cost effective alternative to high build floor toppings.
- PACKAGING
The PERMACOAT 3000 XCT system is packaged in one and three gallon units. Each unit consists of pre measured components, Part A (Resin) and Part B (Hardener).
- Maintenance
For systems designed for splash and spill exposures, routine wash downs are recommended to reduce the length of chemical exposure. This step is not necessary where the product is recommended for containment service.
- Technology
- Ready-to-Use Products
- Application Methods
- Roller
- Wipe
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids (Volume) | 100.0 | % | — |
| Compressive Strength | 12400.0 | psi | ASTM C579-82 |
| Flexural Strength | 14000.0 | psi | ASTM C580-85 |
| Tensile Strength | 9000.0 | psi | ASTM C307-83 |
| Hardness | 80 - 85 | Shore D | ASTM D 2240 |
| Taber Abrasion (CS 17 Wheels, Loss/1000 Cycles) | 25.0 | mg | ASTM C501-80 |
