XtraBond® 9500NC - General Purpose Advanced Polymer Sealant
XtraBond® 9500NC is a multi-purpose advanced polymer sealant. The product’s one component design ensures that it cures rapidly when exposed to atmospheric moisture to form a durable bond and can be applied in a wide range of temperature and weather conditions (-40° F to 140° F).
Product families
Applications
- Glazing & Window Elements
- Waterproofing & Weatherproofing
- Interior Fixtures
- Sealants & Caulks
- Siding & Trim
- Industrial Adhesives & Sealants
- Industrial Manufacturing
Product Families
- Caulks & Sealants
Other characteristics
- Brand
- XtraBond
- Cure Method
- Moisture Cure
- Product Type
1K (1 component) Sealant, Solvent free (100% Solids) Sealant; 1K (1 component) Sealant; Solvent free (100% Solids) Sealant
- Application Area
- Doors, Windows
- Doors
- Windows
- Application Method
- Gun
- Usage
XtraBond® 9500NC can be used for a variety of applications including, but not limited to, window & door flashing, new construction, stucco, siding, etc.
- Color
- White
- Markets
- Adhesives & Sealants
- Building & Construction
- Industrial
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container.
- Features
- VOC compliant
- No solvents
- 100% solid
- Non - sag
- PACKAGING
- Cartridges
- Sausages
- Pails
- Drums
- Shelf LIfe
Cartridges/sausages, use within 10 months from date of manufacture.; Pails/drums, use within 6 months from date of manufacture.
- Cure
- Moisture Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Drums
- Pails
- Sausages
- Specifications
XtraBond®9500NC meets or exceeds the requirements of ASTM C920 Type S, Grade NS, Class 25, Use NT, G, A, M. Federal Specification TT-S-00230C Type Il, Class A.
- Use Direction
For best results, prepare a clean surface.; Cut nozzle to desired bead size.; Apply with caulking gun, forcing sealant onto the substrate, then tool if needed.; Clean excess material with mineral spirits or similar solvent.
- Application Methods
- Gun
- Surface Preparation
The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion.; Do not apply if surface is contaminated.; It is recommended to test all substrates prior to applications.; Primers are not required for most substrates.
- Ready to Use Product Features
- Durable
- Excellent Compatibility
- General Purpose
- Good Adhesion
- Good Sagging Resistance
- Good Weather Stability
- Low VOC
- Wide Temperature Operating Range
- Linear feet/coverage per 10.1 FL. Oz. Cartridge (298 ml)
Depth. All values are approximations based upon industry information and can vary dramaticaly due to joint dimensions/configurations, porosity, texture of substrates, iregularities, installation techniques, waste, etc. that are beyond Premier Building Solutions' control Premier Building Solutions is not lable for variances to linear feet/coverage: do a test area to determine material required to use
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity (at 4 rpm) | approx. 8,00,000 | cP | RV T-E |
| Movement Capacity | 25.0 | % | — |
| Service Temperature | -40 to 200 | °F | — |
| VOC (Less water and exempt solvent) | max. 10 | g/L | — |
| Cure Rate (Bead, in 48 hours) | 0.25 | inch | — |
| Sag/Slump | max. 0.2 | inch | — |
| Density | approx. 14.8 | lbs./gal | — |
| Skin Time (at 70°F, 50% RH) | max. 20 | minutes | — |
| Tack Free Time (at 70°F, 50% RH) | max. 60 | minutes | — |
| Tensile Strength | 60 - 100 | psi | — |
| Shore A | 25 - 35 | — | — |
| Staining | None | — | — |
