XtraBond® 100 - Siliconized Acrylic Sealant
- Chemical Family
- Acrylics & Acrylates
Product families
Applications
- Consumer Goods — Housewares
- Interior
- Glazing & Window Elements
- Interior Fixtures
- Sealants & Caulks
Product Families
- Caulks & Sealants
Other characteristics
- Brand
- XtraBond
- Product Type
- Structural Sealant
- Application Area
- Doors, Kitchen, Windows
- Doors
- Kitchen
- Windows
- Usage
XtraBond®100 can be used for a variety of applications including, but not limited to, general construction, windows & door, kitchen & bath, etc.
- Color
- White
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container. Do not freeze
- Features
- Clean up with water
- Exellent Flexibility
- Mildew resistant
- Quick curing
- Paintable
- Shelf LIfe
Cartridges/Sausages, use within 12 months from date of manufacture; Pails/Drums, use within 6 months from date of manufacture
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Drums
- Pails
- Specifications
XtraBond®100 meets the requirements of ASTM C834 Grade-18°C, Type OP.
- Use Direction
For best results, prepare a clean surface. Cut nozzle to desired bead size. Apply with caulking gun, forcing sealant onto the substrate, then tool if needed. Clean excess material with water.
- Surface Preparation
The substrate must be clean, dry, frost free, sound and free of any oils, greases or incompatible sealers, paints or coatings that may interfere with adhesion. Do not apply if surface is damp or contaminated. It is recommended to test all substrates prior to applications.
- Ready to Use Product Features
- Easy To Paint
- Fast Curing
- Good Bonding Strength
- Good Sagging Resistance
- High Durability
- Long Seal Life
- Mildew Resistant
- Linear Feet/Coverage per 10.1 fl. Oz. Cartridge (298 ml)
- Depth
Technical data
Table 1 of 1
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Skin Time (at 70°F, 50% RH) | max. 30 | minutes | Internal Method |
| Density | approx. 12.2 | lbs./gal | Internal Method |
| Shore A | 20 - 30 | — | ASTM C661 |
| Sag/Slump | max. 0.2 | inch | ASTM D2202 |
| Elongation (at Break) | 250 - 350 | % | ASTM D412 |
| Tensile Strength | 100 - 150 | psi | ASTM D412 |
| 100% Modulus of Elasticity | 75 - 125 | psi | ASTM D412 |
| Flash Point | Solvent free | — | Closed Cup |
| VOC (Less water and exempt solvent) | max. 25 | g/L | EPA Method 24 |
| Solids | approx. 80 | % | Internal Method |
| Freeze/Thaw Stability | 5.0 | Cycles | Internal Method |
| Cure Rate (Bead, in 72 hours) | 0.25 | inch | Internal Method |
