XtraBond® 250 - 100% RTV Silicone Sealant
- Chemical Family
- Silicones
XtraBond® 250 is a 100% acetoxy-based, high performance silicone engineered for applications that require a 100% silicone solution. The product is formulated as a one component, mildew resistant sealant that is permanently flexible and offers excellent adhesion.
Product families
- Caulks & Sealants
Other characteristics
- Brand
- XtraBond
- Product Type
- 1K (1 component) Sealant
- Application Area
Bathrooms, Blast Freezer, Doors, Marine Applications, Windows; Bathrooms; Blast Freezer; Doors; Marine Applications; Windows
- Application Method
- Gun
- Compatible Substrates & Surfaces
- Marble
- Usage
XtraBond®250 can be used for a variety of applications including, but not limited to, walk-in coolers & freezers, cultured marble, kitchen & bath, industrial, marine, etc.
- Color
- Black
- Bronze
- Transparent
- Markets
- Adhesives & Sealants
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Industrial
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container
- Features
- Consistent gunablility & tooling
- Approved for cultured marble
- Mildew resistant formula
- Excellent adhesion
- Non-paintable
- Non-sag
- PACKAGING
- Catridges
- Pails
- Drums
- Shelf LIfe
Cartridges/Sausages, use within 18 months from date of manufacture; Pails/Drums, use within 12 months from date of manufacture
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Drums
- Pails
- Labeling Claims
- Food Contact Acceptable
- Use Direction
For best results, prepare a clean surface. Cut nozzle to desired bead size. Apply with caulking gun, forcing sealant onto the substrate, then tool if needed. Clean excess material with mineral spirits or similar solvent.
- Application Methods
- Gun
- Surface Preparation
The substrate must be clean, dry, frost free, sound and free of any oils, greases or incompatible sealers, paints or coatings that may interfere with adhesion. Do not apply if surface is damp or contaminated. It is recommended to test all substrates prior to applications. Primers are not required for most substrates.
- Certifications and Compliance
- NSF Approved
- Ready to Use Product Features
- Flexible
- Good Adhesion
- Good Sagging Resistance
- High Performance
- Mildew Resistant
- Moisture Resistant
- Room Temperature Vulcanizing
- Compatible Substrates and Surfaces
- Marble
Technical data
Table 1 of 1
15 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shore A | 15 - 25 | — | ASTM C661 |
| Movement Capacity | 0.25 | % | ASTM C719 |
| Sag/Slump | max. 0.2 | inch | ASTM D2202 |
| Staining | None | — | ASTM D2203 |
| Elongation (at Break) | 400 - 450 | % | ASTM D412 |
| Tensile Strength | 200 - 250 | psi | ASTM D412 |
| 100% Modulus of Elasticity | 40 - 80 | psi | ASTM D412 |
| UV Rating (after 2500 hours) | No discoloration or change in appearance | — | ASTM G154 |
| VOC (Less water and exempt solvent) | max. 23 | g/L | EPA Method 24 |
| Solids | min. 96 | % | Internal Method |
| Service Temperature | -40 to 400 | °F | Internal Method |
| Cure Rate (Bead, in 24 hours) | 0.25 | inch | Internal Method |
