XtraBond® 1500 - Premium Grade Butyl Sealant
Product families
Applications
- EIFS & Insulation
- Sealants & Caulks
- Wall Panels
Product Families
- Caulks & Sealants
Other characteristics
- Brand
- XtraBond
- Product Type
- 1K (1 component) Sealant
- Application Area
- Wall Panels
- Application Method
- Gun
- Compatible Substrates & Surfaces
- Metal, Plastics
- Usage
XtraBond® 1500 can be used for a variety of applications including, but not limited to, metal building panels, structural bonding, insulation, exterior, etc.
- Color
- Black
- White
- Markets
- Building & Construction
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (max. 50% RH) environment at room temperature (71 - 75°F) in their unopened container. Do not freeze.
- Features
- Permanently flexible
- Excellent adhesion
- Non - sag & slump
- Non - staining
- Paintable
- PACKAGING
- Cartridges
- Pails
- Drums
- Shelf LIfe
Cartridges/sausages, use within 12 months from date of manufacture.; Pails/drums, use within 6 months from date of manufacture.
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Drums
- Pails
- Use Direction
For best results, prepare clean surface.; Cut nozzle to desired bead size.; Apply with caulking gun, forcing sealant onto the substrate, then tool if needed.; Clean excess material with mineral spirits or similar solvent.
- Application Methods
- Gun
- Surface Preparation
The substrate must be clean, dry, frost free, sound and free of any oils, greases or incompatible sealers, paints or coatings that may interfere with adhesion.; Do not apply if surface is damp or contaminated.; It is recommended to test all substrates prior to applications.
- Ready to Use Product Features
- Good Adhesion
- Good Bonding Strength
- Good Sagging Resistance
- Good Stain Resistance
- High Durability
- Improved Solvent Release
- Non-slump
- Primerless
- Compatible Substrates and Surfaces
- Metal
- Plastics
- Linear feet/coverage per 10.1 FL. Oz. Cartridge (298 ml)
Depth. Note : All values are approximations based upon industry information and can vary dramaticaly due to joint dimensions/configurations, porosity, texture of substrates, iregularities, installation techniques, waste, etc. that are beyond Premier Building Solutions' control Premier Building Solutions is not lable for variances to linear feet/coverage: do a test area to determine material required to use
Technical data
Table 1 of 1
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Sag/Slump | max. 0.2 | inch | ASTM D2202 |
| Staining | None | — | ASTM D2203 |
| Elongation (at Break) | 300 - 350 | % | ASTM D412 |
| Tensile Strength | 75 - 125 | psi | ASTM D412 |
| UV Rating (after 2500 hours) | No discoloration or change in appearance | — | ASTM G154 |
| VOC (Less water and exempt solvent) | max. 250 | g/L | EPA Method 24 |
| Service Temperature | -40 to 200 | °F | Internal Method |
| Skin Time (at 70°F, 50% RH) | max. 10 | hours | Internal Method |
| Tack Free Time (at 70°F, 50% RH) | max. 24 | hours | Internal Method |
