To catalogue
XtraFoam™ MB - Multi-Bond Adhesive Foam
- Chemical Family
- Polyurethanes (PU)
Product families
Automotive & Transportation — Bonding & Assembly
- Transportation Assembly
Building & Construction — Building Envelope & Roofing
- EIFS & Insulation
Other characteristics
- Brand
- XtraFoam
- Density
- 20.0 - 27.2 kg/m³
- End Uses
- Fasteners, Floor, Seam Sealing, Wall Panels
- Fasteners
- Floor
- Seam Sealing
- Wall Panels
- Usage
XtraFoam™ MB can be used for a variety of applications including, but not limited to, fixing & sealing building materials, countertop applications, fastener applications, subfloor, drywall, panels.
- Markets
- Automotive & Transportation
- Building & Construction
- Storage
Material must be stored upright when not in use. 12 months in unopened packaging in a cool and dry storage place at temperatures of 75°F.
- Features
- Excellent adhesion to various substrates
- For professional gun applications
- Cold temperature application
- Low expansion formula
- Low post expansion
- Excellent stability
- High bond
- PACKAGING
- Aerosol cans
- Shelf LIfe
- 12 Months
- Product Type
- Foam
- Technology
- Ready-to-Use Products
- Packaging Type
- Cans
- Product Families
- Ready-to-Use Products — Foams
- Use Direction
- Type
- ALL substrates except PE and PP. State of Surface: clean, free of dust and grease.
- Preparation
- Moistening of the surfaces improves adhesion, curing, and denser cellular structure. Follow directions on attaching Foam Gun Applicator. For excellent adhesion, do not allow more than 8 minutes to elapse between applying adhesive and attaching substrate. Longer than eight minutes 'open time' will negatively affect adhesion. After following instructions for set-up, the dispensing gun is ready to use. For best results, use in temperatures between 60 - 100°F. For better results, spray mist into cavity prior to applying foam.
- Application Methods
- Gun
- Ready to Use Product Features
- Durable
- Good Bonding Strength
- Low Thermal Expansion
- Compatible Substrates and Surfaces
- Brick
- Concrete
- Granite
- Marble
- Metal
- Wood
- Health and Safety Recommendations
Apply the standard industrial hygiene techniques. Wear gloves and safety goggles. Remove cured foam by mechanical means only, never burn away
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| R-Value | 4.25 | psi | ASTM C518 |
| Service Temperature | 230.0 | °F | — |
| Coverage | 219.0 | ft | — |
| Core Density | 1.25 - 1.70 | lbs./ft³ | — |
| Curing Rate (for a ½" bead) | 30.0 | minutes | — |
| Take Free (for a ½" Bead) | 8 - 10 | minutes | — |
| Pressure Build | 0.15 - 1.20 | psi | — |
