XtraBond® 9500TX - Textured Advanced Polymer Sealant
XtraBond® 9500TX is a textured high performance, one component, permanently flexible advanced polymer sealant that’s easy to install. Its advanced chemistry makes it ideal for a wide range of construction and industrial applications.
Product families
Applications
- Glazing & Window Elements
- Waterproofing & Weatherproofing
- Interior Fixtures
- Plasters & Renders
- Sealants & Caulks
- Siding & Trim
Product Families
- Caulks & Sealants
Other characteristics
- Brand
- XtraBond
- Cure Method
- Moisture Cure
- Product Type
1K (1 component) Sealant, Solvent free (100% Solids) Sealant; 1K (1 component) Sealant; Solvent free (100% Solids) Sealant
- Application Area
- Doors, Siding, Stucco, Windows
- Doors
- Siding
- Stucco
- Windows
- Application Method
- Gun
- Usage
XtraBond® 9500TX can be used for a variety of applications including, but not limited to, perimeter sealing of windows, doors & skylights, waterproof membrane, industrial, stucco, siding, etc.
- Markets
- Building & Construction
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container.
- Features
- Fast cure at a wide range of temperatures
- Textured appearance
- Paintable in 2 hours
- Very low VOCs
- No solvents
- Non - sag
- PACKAGING
- Cartridges
- Sausages
- Pails
- Drums
- Cure
- Moisture Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Drums
- Pails
- Sausages
- Specifications
XtraBond® 9500TX meets or exceeds the requirements of ASTM C920 Type S, Grade NS, Class 12.5, Use NT, G, A, M. Federal specification TT-S-00230C Type II, Class B.
- Use Direction
For Best Results, prepare a clean, dry surface.; Apply with a caulking gun forcing sealant onto the substrate, then tool if needed.; Can be applied in a wide range of temperatures.; Clean excess material with mineral spirits or similar solvent.
- Application Methods
- Gun
- Surface Preparation
The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion.; Do not apply if surface is contaminated.; It is recommended to test all substrates prior to applications.; Primers are not required for most substrates.
- Ready to Use Product Features
- Fast Curing
- Flexible
- Good Adhesion
- Good Sagging Resistance
- High Performance
- Low VOC
- Waterproofing
- Wide Temperature Operating Range
- Linear feet/coverage per 10.1 FL. Oz. Cartridge (298 ml)
Depth. Note : All values are approximations based upon industry information and can vary dramaticaly due to joint dimensions/configurations, porosity, texture of substrates, iregularities, installation techniques, waste, etc. that are beyond Premier Building Solutions' control Premier Building Solutions is not lable for variances to linear feet/coverage: do a test area to determine material required to use
