XtraBond® 150 - RTV Silicone Sealant
- Chemical Family
- Silicones
XtraBond® 150 is a one component, permanently flexible, RTV (Room Temperature Vulcanizing) mildew-resistant silicone sealant that is the industry standard. The product’s tough chemical resistance makes it a worry-free solution for a wide range of applications.
Product families
Applications
- Glazing & Window Elements
- Interior Fixtures
- Sealants & Caulks
Product Families
- Caulks & Sealants
Other characteristics
- Brand
- XtraBond
- Cure Method
- Moisture Cure
- Product Type
- 1K (1 component) Sealant
- Application Area
- Doors, Windows
- Doors
- Windows
- Application Method
- Gun
- Compatible Substrates & Surfaces
- Aluminum, Glass, Metal, Wood
- Usage
XtraBond®150 can be used for a variety of applications including, but not limited to, general construction, kitchen & bath, transportation, industrial, etc.
- Markets
- Building & Construction
- Storage
Be sure to rotate inventory accordingly. Materials must be properly stored in a low humidity (<50% RH) environment at room temperature (71 - 75°F) in their unopened container
- Features
- Excellent adhesion to glass
- Window & door approved
- Easy to gun, easy to tool
- Non-sag & slump
- Non-paintable
- Shelf LIfe
Cartridges/ Sausages, use within 18 months from date of manufacture; Pails/ Drums, use within 12 months from date of manufacture
- Cure
- Moisture Cure
- Technology
- Ready-to-Use Products
- Packaging Type
- Cartridges
- Drums
- Pails
- Use Direction
For best results, prepare a clean surface. Cut nozzle to desired bead size. Apply with caulking gun, forcing sealant onto the substrate, then tool if needed. Clean excess material with mineral spirits or similar solvent.
- Application Methods
- Gun
- Surface Preparation
The substrate must be clean, frost free and free of any oils, greases or incompatible sealers that may interfere with adhesion. Do not apply if surface is contaminated. It is recommended to test all substrates prior to applications. This product is not compatible with rubberized asphalt.
- Ready to Use Product Features
- Chemical Resistant
- Fast Curing
- Flexible
- Good Sagging Resistance
- Mildew Resistant
- Non-slump
- Room Temperature Vulcanizing
- Compatible Substrates and Surfaces
- Aluminum
- Glass
- Metal
- Wood
- Linear Feet/Coverage per 10.1 fl. Oz. Cartridge (298 ml)
- Depth
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Shore A | 15 - 25 | — | ASTM C661 |
| Sag/Slump | max. 0.2 | inch | ASTM D2202 |
| Elongation (at Break) | 350 - 400 | % | ASTM D412 |
| Tensile Strength | 160 - 200 | psi | ASTM D412 |
| 100% Modulus of Elasticity | 40 - 80 | psi | ASTM D412 |
| UV Rating (after 5000 hours) | No discoloration or change in appearance | — | ASTM G154 |
| VOC (Less water and exempt solvent) | max. 30 | g/L | EPA Method 24 |
| Solids | min. 80 | % | Internal Method |
| Service Temperature | -40 to 300 | °F | Internal Method |
| Cure Rate (Bead, in 48 hours) | 0.25 | inch | Internal Method |
| Density | approx. 8 | lbs./gal | Internal Method |
| Skin Time (at 70°F, 50% RH) | max. 15 | minutes | Internal Method |
