To catalogue
XtraFoam™ - Minimal Expanding Foam Sealant
- Chemical Family
- Polyurethanes (PU)
Product families
Applications
Building & Construction — Building Envelope & Roofing
- Glazing & Window Elements
Building & Construction — Building Materials
- Interior Fixtures
- Sealants & Caulks
- Siding & Trim
Product Families
Ready-to-Use Products — Adhesives & Sealants
- Caulks & Sealants
Other characteristics
- Brand
- XtraFoam
- Product Type
- 1K (1 component) Sealant
- Application Area
- Door Frames, Window Frames
- Door Frames
- Window Frames
- Application Method
- Gun
- Compatible Substrates & Surfaces
- Aluminum, Metal, Wood
- Usage
XtraFoam™ can be used for a variety of applications including, but not limited to, wood, aluminum and vinyl doors and windows, areas of air infiltration, windows, doors.
- Markets
- Building & Construction
- Storage
Material must be stored upright when not in use. 12 months in unopened packaging in a cool and dry storage place at temperatures of 75°F.
- Features
- Will not warp or bow frames or jambs
- Provides water-resistant, airtight seal
- Excellent adhesion on most substrates
- High thermal and acoustical insulation
- Low expansion, closed cell formula
- For professional gun applications
- PACKAGING
- Aerosol cans
- Shelf LIfe
- 12 Months
- Technology
- Ready-to-Use Products
- Packaging Type
- Cans
- Labeling Claims
- Chlorofluorocarbon (CFC)-Free
- Environmentally Friendly
- Use Direction
- ALL substrates except PE and PP.
- State of surface
- clean, free of dust and grease.
- Preparation
- Moistening of the surfaces improves adhesion, curing, and denser cellular structure. Aerosol can, shake well before use, insert into gun adaptor, turn 90 degrees where can is upside down and click to fit into foam gun. Shake can regularly during application. If PU Foam is applied in layers, spray surface with a fine water spray between each layer to ensure optimal cellular structure and perfect curing.
- Optimum application temperature
- 60 - 100°F.
- For Best Results, use in temperatures between 60 - 100°F. For Better Results, spray mist into cavity prior to applying foam.
- Application Methods
- Gun
- Ready to Use Product Features
- Good Adhesion
- Low Thermal Expansion
- Moisture Barrier
- Oxygen Barrier
- Thermally Insulating
- Water Resistant
- Compatible Substrates and Surfaces
- Aluminum
- Metal
- Wood
- Health and Safety Recommendations
Apply the standard industrial hygiene techniques. Wear gloves and safety goggles. Remove cured foam by mechanical means only, never burn away.
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| R-Value | 4.25 | psi | ASTM C518 |
| Service Temperature | 230.0 | °F | — |
| Coverage | 164.0 | ft | — |
| Core Density | 1.25 - 1.70 | lbs./ft³ | — |
| Curing Rate (for a ½" bead) | 30.0 | minutes | — |
| Take Free (for a ½" Bead) | 5.0 | minutes | — |
| Pressure Build | 0.15 - 1.20 | psi | — |
