PolyBrite® 95.1
- Chemical Family
- Silicones
PolyBrite® 95.1 is a ready-to-use, solvent-borne, moisture-cure silicone roof coating available in white or as tinted, which cures to form a seamless membrane when applied over the entire roof area. It also keeps the surface cool, providing protection from ultraviolet sun and other weather exposures.
Product families
Applications
- Waterproofing & Weatherproofing
Product Families
- Protective Coatings
Other characteristics
- Brand
- PolyBrite
- Features
Fungus Resistant, Good UV Protection, Good Weather Stability, High Elongation, High Temperature Resistance, High Tensile Strength, Solvent-Based
- Product Type
- Solventborne Coating
- Spray
- Roof Brush
- Roll
- Application Area
- Roofing Substrates
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Coated Surfaces, Concrete, Metal, Polyurethane
- Usage
Designed for use on existing smooth surface BUR, granulated cap sheets, well-adhered acrylic coatings, concrete, metal, sprayed in place polyurethane foam (SPUF) and various single-ply roofing membranes. Primer may be required.
- Color
- Grey
- Tan
- White
- Carrier
- Solvent-based
- Markets
- Building & Construction
- Warning
Odors and Mists - Avoid breathing silicone odors and spray mists. Use an appropriate MESA/NIOSH approved respirator when exposure can exceed recommended PEL. Additional care must be taken to prevent roof top HVAC equipment from introducing silicone odors into interior areas during application.; Waste Disposal - Empty containers must be disposed of in accordance with local, state and federal regulations.; For Professional Use Only - Keep out of the reach of children; This product is not recommended for interior use.; Installers should exercise caution during spray processes to avoid falls caused by stepping into slippery coating. Installers should read and understand all technical and informational literature on this product, including the SDS, prior to use of the product.; Refer to safety data sheet (SDS) for specific data and handling of our products.; All data furnished refers to standard production using manufacturing testing tolerances. The product user, and not Polyglass, is responsible for determining the suitability and compatibility of our products for the user's intended use.
- Benefits
Polyglass offers all the product components needed for these systems – one stop shop; A variety of systems which can be used on new construction or tear off and replace roofs; Offers excellent resistance to extended exposure to solar ultraviolet energy; Can decrease the roof surface temperature, thereby reducing energy costs; Superior tensile strength for a strong roof; Easy to install, no kettle, no torch and no special tools or equipment needed other than a heavy roller; Much safer than traditional hot asphalt BUR or torch down systems; Should reduce the cost of insurance for the roofing contractor; Low VOC and odor - presents minimal hazard to the applicator or the environment; Resistant to dirt pick-up – easy to maintain; Fungal and algal resistant
- PACKAGING
- 5 Gallon (18.9 Liters) Pail
- 50 Gallon (189 Liters) Drum
- Shelf LIfe
12 months from date of manufacture when stored between 40ºF and 80ºF.
- Cure
- Moisture Cure
- Technology
- Ready-to-Use Products
- Ponding Water
The chemistry of silicone, which Polyglass Silicone roof coatings are manufactured with, is not adversely affected by ponding water or prolonged rain exposure. Please be advised that good roofing practices, Building Codes and The National Roofing Contractors Association (NRCA) consider ponding water on any roof undesirable and recommend that all roof systems be designed and built to ensure positive drainage (See the NRCA Roofing and Waterproofing Manual and any applicable Code Ordinances).
- Packaging Type
- Drums
- Pails
