PolyBrite® 70
- Chemical Family
- Acrylics & Acrylates
PolyBrite® 70 is a 100% acrylic, premium grade water-based elastomeric coating which cures to form a seamless membrane. PolyBrite® 70 reduces roof temperatures, extends the life cycle performance of new and existing roof systems, and provides protection from ultraviolet sunlight and other weather exposures.
Product families
Applications
- EIFS & Insulation
- Waterproofing & Weatherproofing
Product Families
- Protective Coatings
Other characteristics
- Brand
- PolyBrite
- Features
Excellent Dirt Pick-up Resistance, Fungus Resistant, Good UV Protection, Good Weather Stability, High Elongation, High Tensile Strength, Low VOC, Service Life Extension, Sunlight Resistant, UV Resistant, Water-based
- Product Type
- Elastomeric Coating, Waterborne Coating
- Elastomeric Coating
- Waterborne Coating
- Spray
- Roof Brush
- Roll
- Application Area
- Masonry, Roofing Substrates
- Masonry
- Roofing Substrates
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal, Polyurethane, Wood
- Usage
Suitable for use on various conventional smooth and granulated BUR and polymer modified roof membranes with smooth and mineral surfacing, sprayed polyurethane foam, most metal roof systems, single-ply membranes, concrete, exterior-grade plywood, rigid coverboards such as Securock®. A substrate adhesion test is recommended prior to product application.; Suitable for use on cementitious stucco, EIFS and other masonry surfaces.; PolyBrite 70 is available in a quick-set version (PolyBrite 70-QS).; Primers or special precautions may be needed, consult Polyglass Technical Services.
- Color
- Custom
- Grey
- White
- Carrier
- Water
- Markets
- Building & Construction
- Benefits
Polyglass offers all the product components needed for these systems – one stop shop; A variety of systems which can be used on new construction or tear off and replace roofs; Offers excellent resistance to extended exposure to solar ultraviolet energy; Can decrease the roof surface temperature, thereby reducing energy costs; Superior tensile strength for a strong roof; Easy to install, no kettle, no torch and no special tools or equipment needed other than a heavy roller; Much safer than traditional hot asphalt BUR or torch down systems; Should reduce the cost of insurance for the roofing contractor; Low VOC and odor - presents minimal hazard to the applicator or the environment; Resistant to dirt pick-up – easy to maintain; Fungal and algal resistant
- PACKAGING
- 4.75 Gallon (17.9 Liters) Pail
- 50 Gallon (189 Liters) Drum
- 275 Gallon (1039.5 Liters) Tote
- Shelf LIfe
Shelf life is 18 months if stored in original unopened containers.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Labeling Claims
- Low VOC
- Non-Flammable
- Application Methods
- Brush
- Roller
- Spray
- Handling
All containers should be sealed when not in use.; Keep from freezing.; Store between 40°F and 100°F.; Observe normal safeguards for storing and handling of this product prior to and during application.
- Benefits and Features
Extends the useful life of the roof.; UV resistant.; Decreases roof surface temperature, which can reduce energy costs.; Offers high tensile strength and elongation.; Resistant to dirt pick up and is fungal and algal resistant.; Low VOC; Non-flammable.
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 28000 - 58000 | cP | Brookfield 4d/5 RPM/77°F |
| Solids (By Volume) | 51 - 55 | % | ASTM D2697 |
| Solids (By Weight) | 61 - 65 | % | ASTM DI644 |
| Elongation | 230 - 290 | % | ASTM D2370 |
| Tensile Strength | 235 - 335 | psi | ASTM D2370 |
| Permeance | 7 - 13 | perms | ASTM D1653 |
| Water Swell | 5 - 7 | % | ASTM D471 |
| Accelerated Weathering (1000h, No Cracking, No Checking) | Pass | — | ASTM D4798 |
| Adhesion (Over Approved Substrates) | Pass | pli | ASTM C794/ASTM D903 |
| Fungi resistance (Rating) | Pass | — | ASTM G21 |
| Tear Resistance | 65 - 75 | lbf/in | ASTM D624 |
| Low Temp Flexibility (After 1000h Weathering, 1/2" Mandrel, 26°C) | Pass | — | ASTM D522 |
