PolyBrite® 33 CS
- Chemical Family
- Acrylics & Acrylates
PolyBrite® 33 CS is a water-based 100% Acrylic elastomeric coating that cures to form a seamless shield when applied over approved roofing substrates. PolyBrite® 33 CS is specifically formulated for hot dry climates. Due to its high reflectance properties, PolyBrite® 33 CS protects against damaging ultraviolet rays, keeping the roof surface cool in high temperatures, resulting in reduced building energy costs.
Product families
Applications
- EIFS & Insulation
Product Families
- Protective Coatings
Other characteristics
- Brand
- PolyBrite
- Features
Durable, Excellent Flowability, Excellent Leveling Properties, Fungus Resistant, Good UV Protection, High Elongation, High Reflectivity, High Temperature Performance, High Tensile Strength, Low VOC, Water-based
- Product Type
- Elastomeric Coating, Waterborne Coating
- Elastomeric Coating
- Waterborne Coating
- Spray
- Roof Brush
- Roll
- Application Area
- Roofing Substrates
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Masonry, Metal, Wood
- Usage
Suitable for use on various conventional smooth and granulated BUR and polymer modified roof membranes with smooth mineral surfacing, most metal roof systems, single ply membranes (primers or special precautions may be required), concrete, exterior grade plywood, rigid coverboards such as Dens-Deck® and Securock® and SPUF. A substrate adhesion test is recommended prior to product application.. Suitable for use on cementitious stucco, EIFS and other masonry surfaces.
- Color
- Grey
- Tan
- White
- Carrier
- Water
- Markets
- Building & Construction
- Benefits
Polyglass offers all the product components needed for these systems – one stop shop; A variety of systems which can be used on new construction or tear off and replace roofs; Offers excellent resistance to extended exposure to solar ultraviolet energy; Can decrease the roof surface temperature, thereby reducing energy costs; Superior tensile strength for a strong roof; Easy to install, no kettle, no torch and no special tools or equipment needed other than a heavy roller; Much safer than traditional hot asphalt BUR or torch down systems; Should reduce the cost of insurance for the roofing contractor; Low VOC and odor - presents minimal hazard to the applicator or the environment; Resistant to dirt pick-up – easy to maintain; Fungal and algal resistant
- PACKAGING
- 5 Gallon (18.9 Liters) Pail
- 55 Gallon (208.1 Liters) Drum
- 250 Gallon (945 Liters) Tote
- Shelf LIfe
Shelf life is 18 months if stored in original unopened containers.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Labeling Claims
- Low VOC
- Non-Flammable
- Application Methods
- Brush
- Roller
- Spray
- HIGHLIGHTS
PolyBrite® 33 CS is specially formulated to exhibit superior wet hide during installation and dry hide once cured.. Exceptional product flow and leveling characteristics results in ease of application.
- Handling
All containers should be sealed when not in use.; Keep from freezing.; Store between 40°F and 100°F.; Observe normal safeguards for storing and handling of this product prior to and during application.
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Accelerated Weathering (1000h) | Pass | — | ASTM D4798 |
| Low Temp Flexibility (1/2" mandrel, 26°F) | Pass | — | ASTM D522B |
| Fungi Resistance | Pass | — | ASTM G21 |
| Adhesion (Dry) | Pass | pli | ASTM D6083 |
| Solids (By Weight) | 64 - 68 | % | ASTM DI644 |
| Solids (By Volume) | 53 - 57 | % | ASTM D2697 |
| Viscosity (Nominal,Brookfield©, 4d/5RPM/77°F) | 65000.0 | cPs | ASTM D2196 |
| Weight | 11.5 - 12.1 | lb/gal | ASTM D1475 |
| Water Swell | 11 - 13 | % | ASTM D371 |
| VOC | max. 50 | g/l | Calculated |
| Application Temperature | min. 50 | °F | — |
| Initial Solar Reflectance | 0.87 | — | — |
