PolyBrite® 74
PolyBrite® 74 is a water-based industrial rust inhibitive coating manufactured with a light blue color to easily determine coverage. PolyBrite® 74 is designed to inhibit further oxidation resulting in rust degradation and to prevent bleed-through when using elastomeric coatings.
Product families
- Protective Coatings
Other characteristics
- Brand
- PolyBrite
- Features
Bleed Resistant, Cleanable, Corrosion Resistant, Oxidation Resistant, Water-based
- Product Type
- Waterborne Coating
- Spray
- Roof Brush
- Roll
- Application Area
- Roofing Substrates
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Metal
- Usage
Recommended for use on various uncoated metal components that exhibit oxidation or "rusting". Designed to prevent further exposure to environmental conditions that cause oxidation of the metal, commonly known as rust.. Promotes adhesion of elastomeric coating applied to uncoated metal surface that exhibit signs of oxidation. Contact Polyglass Technical Services for clarification of unusual surfaces or project conditions.
- Color
- Blue
- Carrier
- Water
- Benefits
Polyglass offers all the product components needed for these systems – one stop shop; A variety of systems which can be used on new construction or tear off and replace roofs; Offers excellent resistance to extended exposure to solar ultraviolet energy; Can decrease the roof surface temperature, thereby reducing energy costs; Superior tensile strength for a strong roof; Easy to install, no kettle, no torch and no special tools or equipment needed other than a heavy roller; Much safer than traditional hot asphalt BUR or torch down systems; Should reduce the cost of insurance for the roofing contractor; Low VOC and odor - presents minimal hazard to the applicator or the environment; Resistant to dirt pick-up – easy to maintain; Fungal and algal resistant
- PACKAGING
- 4.75 Gallon (17.9 Liters) Pail
- 50 Gallon (189 Liters) Drum
- 275 Gallon (1039.5 Liters) Tote
- Shelf LIfe
Shelf life is 18 months if stored in original unopened containers.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Labeling Claims
- Non-Flammable
- Application Methods
- Brush
- Roller
- Spray
- Handling
All containers should be sealed when not in use.; Keep from freezing.; Store between 40°F and 100°F.; Observe normal safeguards for storing and handling of this product prior to and during application.
- Benefits and Features
Enhanced with a light blue color to ensure areas of application receive proper coverage.. Water-Based formula is non-flammable during application, compliant with VOC requirements and easily cleans up with water prior to curing.
- Applicable Standards
- Florida Building Code
- Compatible Substrates
- Most uncoated metal surfaces
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Solids (By Volume) | 48 - 52 | % | ASTM D2697 |
| Solids (By Weight) | 56 - 60 | % | ASTM D2697 |
| Viscosity | 35000 - 48000 | cP | ASTM D2196 |
| Flash Point | min. 212 | °F | PMCC |
| VOC | max. 50 | g/L | Calculated |
| Elongation | 350 - 450 | % | ASTM D2370 |
| Tensile Strength | 175 - 225 | psi | ASTM D2370 |
| Accelerated Weathering (1000h) | Pass | — | ASTM D4798 |
| Fungi Resistance | Pass | — | ASTM G21 |
| pH | min. 9.2 | — | Std method |
| Weight | 10 - 11 | lb/gal | ASTM D1475 |
