PolyBrite® 24
PolyBrite® 24 is a water-based elastomeric coating available in white and kool gray, which cures to form a seamless membrane when applied over the entire roof area. It offers the unique ability to extend the life cycle of new and existing roof systems, in addition to keeping the surface cool, and providing protection from ultraviolet sun and other weather exposures.
Product families
Applications
- EIFS & Insulation
- Waterproofing & Weatherproofing
Product Families
- Protective Coatings
Other characteristics
- Brand
- PolyBrite
- Features
Excellent Dirt Pick-up Resistance, Fungus Resistant, Good UV Protection, Good Weather Stability, High Elongation, High Tensile Strength, Low VOC, Service Life Extension, UV Resistant, Water Resistant, Water-based
- Product Type
- Elastomeric Coating, Waterborne Coating
- Elastomeric Coating
- Waterborne Coating
- Spray
- Roof Brush
- Roll
- Application Area
- Masonry, Roofing Substrates
- Masonry
- Roofing Substrates
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Metal, Polyvinyl Chloride (PVC)
- Usage
Protect and waterproof a variety of roof surfaces.; Suitable for use on various conventional smooth and granulated BUR and granulated polymer modified roof membranes, most metal roof systems, PVC single-ply membranes (Primer may be required.), concrete, rigid coverboards such as Dens-Deck® and Securock®.; Suitable for use on cementitious stucco, EIFS and other masonry surfaces.
- Color
- Grey
- White
- Carrier
- Water
- Markets
- Building & Construction
- Benefits
Polyglass offers all the product components needed for these systems – one stop shop; A variety of systems which can be used on new construction or tear off and replace roofs; Offers excellent resistance to extended exposure to solar ultraviolet energy; Can decrease the roof surface temperature, thereby reducing energy costs; Superior tensile strength for a strong roof; Easy to install, no kettle, no torch and no special tools or equipment needed other than a heavy roller; Much safer than traditional hot asphalt BUR or torch down systems; Should reduce the cost of insurance for the roofing contractor; Low VOC and odor - presents minimal hazard to the applicator or the environment; Resistant to dirt pick-up – easy to maintain; Fungal and algal resistant
- PACKAGING
- 4.75 Gallon (17.9 Liters) Pail
- 50 Gallon (189 Liters) Drum
- 275 Gallon (1039.5 Liters) Tote
- Shelf LIfe
Shelf life is 18 months if stored in original unopened containers.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Labeling Claims
- Low VOC
- Non-Flammable
- Application Methods
- Brush
- Roller
- Spray
- Handling
All containers should be sealed when not in use.; Keep from freezing.; Store between 40°F and 100°F.; Observe normal safeguards for storing and handling of this product prior to and during application.
- Benefits and Features
Offers excellent resistance to extended exposure to solar ultraviolet energy.; By decreasing roof surface temperature, PolyBrite 24 can reduce energy costs.; Offers high tensile strength and elongation.; Resistant to dirt pick up.; Fungal and algal resistant – even in high temperatures.; Low VOC, non-flammable and presents minimal hazard to the applicator or the environment.
- Applicable Standards
- UL Classified - File #R14571
- CRRC Listed (White only)
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Accelerated Weathering (1000h) | Pass | — | ASTM D4798 |
| Permeance (Wet) | 13.0 | perms | ASTM D1653 |
| Permeance (Dry) | 7.0 | perms | ASTM D1653 |
| Fungi Resistance | Pass | — | ASTM G21 |
| Elongation | 175 - 225 | % | ASTM D2370 |
| Tensile Strength | 300 - 400 | psi | ASTM D2370 |
| Flexibility (0ºF Mandrel) | Pass | — | ASTM D522B |
| Viscosity | 28000 - 58000 | cP | Brookfield©4d/5 RPM/77°F |
| Weight | 10.5 - 11.5 | lb/gal | ASTM D1475 |
| Solids (By Weight) | 53 - 57 | % | ASTM D1644 |
| Solids (By Volume) | 47.0 | % | ASTM D2697 |
| VOC | max. 50 | g/l | Calculated |
