PolyBrite® 55
- Chemical Family
- Acrylics & Acrylates
PolyBrite® 55 is an elastomeric roof coating specially developed for application over new Sprayed Polyurethane Foam (SPF) roof systems. It is formulated for superior adhesion over foam. It employs a highly flexible acrylic polymer for enhanced thermal expansion and contraction capabilities typical of roofing foam surfaces.
Product families
- Base Coats & Undercoats
- Protective Coatings
- Top Coats
Other characteristics
- Brand
- PolyBrite
- Features
Excellent Dirt Pick-up Resistance, Excellent Substrate Adhesion, Flexible, Good UV Protection, Low VOC, Service Life Extension
- Product Type
- Base Coat, Elastomeric Coating, Top Coat
- Base Coat
- Elastomeric Coating
- Top Coat
- Spray
- Roof Brush
- Roll
- Application Area
- Roofing Substrates
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Polyurethane
- Usage
PolyBrite 55 is designed to protect and seal new sprayed polyurethane foam (SPF) roof systems and can be used as a base and/or surface coating.
- Color
- Grey
- Tan
- White
- Benefits
Polyglass offers all the product components needed for these systems – one stop shop; A variety of systems which can be used on new construction or tear off and replace roofs; Offers excellent resistance to extended exposure to solar ultraviolet energy; Can decrease the roof surface temperature, thereby reducing energy costs; Superior tensile strength for a strong roof; Easy to install, no kettle, no torch and no special tools or equipment needed other than a heavy roller; Much safer than traditional hot asphalt BUR or torch down systems; Should reduce the cost of insurance for the roofing contractor; Low VOC and odor - presents minimal hazard to the applicator or the environment; Resistant to dirt pick-up – easy to maintain; Fungal and algal resistant
- PACKAGING
- 5 Gallon (18.9 Liters) Pail
- 55 Gallon (208.1 Liters) Drum
- Shelf LIfe
Shelf life is 18 months if stored in original unopened containers.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Labeling Claims
- Low VOC
- Non-Flammable
- Application Methods
- Brush
- Roller
- Spray
- Handling
All containers should be sealed when not in use.; Keep from freezing.; Store between 40°F and 100°F.; Observe normal safeguards for storing and handling of this product prior to and during application.
- Benefits and Features
Extends the useful life of the roof; UV resistant; Decreases roof surface temperature, which can reduce energy costs; Resistant to dirt pick up; Low VOC and non-flammable
- Applicable Standards
- ASTM D6083 Type II
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity | 28000 - 58000 | cP | ASTM D2196 |
| Solids (By Volume) | 48 - 52 | % | ASTM D2697 |
| Solids (By Weight) | 53 - 57 | % | ASTM DI644 |
| Elongation | 175 - 225 | % | ASTM D2370 |
| Tensile Strength | 200 - 250 | psi | ASTM D2370 |
| Permeance | 16 - 20 | perms | ASTM D1653 |
| Water Swell | 8 - 10 | % | ASTM D471 |
| Tear Resistance | 55 - 65 | lbf/in | ASTM D624 |
| Accelerated Weathering (1000h, No Cracking, No Checking) | Pass | — | ASTM D4798 |
| Adhesion (Over Approved Substrates) | Pass | — | ASTM C794 |
| Fungi resistance (Rating) | 0 Pass | — | ASTM G21 |
| Low Temp Flexibility (After 1000h Weathering, 1/2" Mandrel, 26°C) | PASS | — | ASTM D522 |
