PolyBrite® 31 CB
- Chemical Family
- Acrylics & Acrylates, StyrenicsAcrylics & AcrylatesStyrenics
PolyBrite® 31 CB is a water-based styrene acrylic elastomeric coating that cures to form a seamless reflective barrier when applied over approved roofing substrates. PolyBrite® 31 CB is specifically formulated for hot dry climates and extends the life cycle of new and existing roof systems by providing protection from ultraviolet sun and other weather conditions. Its highly reflective properties keep the roof surface cool resulting in reduced building energy cost in high temperate conditions.
Product families
Applications
- EIFS & Insulation
- Waterproofing & Weatherproofing
Product Families
- Protective Coatings
Other characteristics
- Brand
- PolyBrite
- Features
Excellent Dirt Pick-up Resistance, Excellent Flowability, Excellent Leveling Properties, Flexible, Fungus Resistant, Good UV Protection, Good Weather Stability, High Elongation, High Reflectivity, High Temperature Performance, High Tensile Strength, Low VOC, Water Resistant, Water-based
- Product Type
- Elastomeric Coating, Waterborne Coating
- Elastomeric Coating
- Waterborne Coating
- Spray
- Roof Brush
- Roll
- Application Area
- Masonry, Roofing Substrates
- Masonry
- Roofing Substrates
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Masonry, Polyvinyl Chloride (PVC)
- Usage
Protect and waterproof a variety of roof surfaces.; Suitable for use on various conventional smooth and granulated BUR and granulated polymer modified roof membranes, most metal roof systems, PVC single-ply membranes (Primer may be required), concrete, rigid coverboards such as Dens-Deck® and Securock®. A substrate adhesion test is recommended prior to product application.; Suitable for use on cementitious stucco, EIFS and other masonry surfaces.
- Color
- Grey
- Tan
- White
- Carrier
- Water
- Markets
- Building & Construction
- Benefits
Polyglass offers all the product components needed for these systems – one stop shop; A variety of systems which can be used on new construction or tear off and replace roofs; Offers excellent resistance to extended exposure to solar ultraviolet energy; Can decrease the roof surface temperature, thereby reducing energy costs; Superior tensile strength for a strong roof; Easy to install, no kettle, no torch and no special tools or equipment needed other than a heavy roller; Much safer than traditional hot asphalt BUR or torch down systems; Should reduce the cost of insurance for the roofing contractor; Low VOC and odor - presents minimal hazard to the applicator or the environment; Resistant to dirt pick-up – easy to maintain; Fungal and algal resistant
- PACKAGING
- 5 Gallon (18.9 Liters) Pail
- 55 Gallon (208.1 Liters) Drum
- 250 Gallon (945 Liters) Tote
- Shelf LIfe
Shelf life is 18 months if stored in original unopened containers.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Totes (IBC)
- Labeling Claims
- Low VOC
- Non-Flammable
- Application Methods
- Brush
- Roller
- Spray
- HIGHLIGHTS
PolyBrite 31 CB exhibits wet hide during installation and dry hide once cured.; The product's flexibility allows it to expand and contract to accommodate normal roof movement, therefore avoiding surface damage.; Exceptional product flow and leveling characteristics results in ease of application.
- Handling
All containers should be sealed when not in use.; Keep from freezing.; Store between 40°F and 100°F.; Observe normal safeguards for storing and handling of this product prior to and during application.
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Accelerated Weathering (1000h) | Pass | — | ASTM D4798 |
| Permeance | max. 20 | US perms | ASTM D1653 |
| Fungi Resistance | Pass | — | ASTM G21 |
| Solids (By Weight) | 60 - 64 | % | ASTM D1644 |
| Solids (By Volume) | 50 - 54 | % | ASTM D2697 |
| Viscosity (Nominal,Brookfield©, 4d/5RPM/77°F) | 48000.0 | cPs | ASTM D2196 |
| Weight | 11.3 - 11.9 | lb/gal | ASTM D1475 |
| VOC | max. 50 | g/l | Calculated |
| Application Temperature | min. 50 | °F | — |
| Initial Solar Reflectance | 0.87 | — | — |
| Initial Thermal Emittance | 0.9 | — | — |
| Solar Reflectance Index (Initial) | 110.0 | — | — |
