Hodopur® ER 00-1
Hodopur® ER 00-1 is the two-component polyurethane high-gloss enamel is intended for applications with high demands on the quality of the surface treatment. It is applied to basic anti-corrosion paints (Hodopur, Hodepox) or suitable fillers and sealants (PES, PUR) and forms the final coating. It can be applied to galvanized surfaces as a single-layer enamel (decorative layer). It is produced in a wide range of shades (RAL or according to an agreed color template). The coating system as a whole is designed for heavy and normal corrosive environments. The created coating film is mechanically resistant (abrasion resistant), chemically stable and UV stable. Hodopur enamel coating systems ensure long-term protection of the substrate against weather conditions.
Properties
- Physical Form
- Dispersion
Product families
Applications
- Equipment & Parts
- Agricultural & Construction Equipment
Product Families
- Enamels
Other characteristics
- Brand
- Hodopur
- Features
- Fast Drying
- Product Type
- Enamel, Top Coat
- Enamel
- Top Coat
- Application Area
- Tanks
- Application Method
- Brush, Spray
- Compatible Substrates & Surfaces
- Iron, Metal, Steel
- Carrier
- Alkyd Resin
- Resin-based
- Markets
- Industrial
- Paints & Coatings
- Appearance
- Homogeneous pigmented thixotropic liquid
- Typical Use
Commercial vehicles, agricultural and handling equipment, boxes, racks and counters in food applications (white), machine tools, etc.
- Technology
- Ready-to-Use Products
- Application Methods
- Brush
- Spray
- Processing Procedure
Substrate preparation (requires dry and clean substrate); Thorough mixing of enamel, preparation of application mixture (hardener Hodopur - TR 00, 4: 1 wt.); After mixing (hardening) the paint with a hardener, the so-called life of the mixture begins to run, for which it is necessary to process it. After this time, the mixture is unusable.; Dilution of email with Hodopur thinner; Possible applications: brush, roller, air gun. The enamel is applied to create an even, solid paint film.; Recommended dry film thickness: 60 - 80 microns in two layers (30-40 microns / 1 layer); Enamel is applied at temperatures above 5°C; Enamel is combined with basic colors (eg Hodopur, Hodepox, etc.)
- Ready to Use Product Features
- Fast Drying
- Compatible Substrates and Surfaces
- Iron
- Metal
- Steel
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit |
|---|---|---|
| Adhesion | 0 - 1 | st. |
| Coverage | 1 - 2 | st. |
| Density | 1.1 - 1.4 | g/cm³ |
| Dew Point Temperature | min. 3 | °C |
| Dilution (Air Spraying, wt) | 15 - 30 | % |
| Dry Matter (Wt) | 74.0 | % |
| Gloss | min. 90 | % |
| Hardening Ratio | 4:1 | — |
| Service Life (hardened mixture) | min. 8 | Hours |
| Temperature (substrate and the environment) | min. 5 | °C |
| TOC | 200.0 | g/l |
| VOC | 305.0 | g/l |
