Wohl Coatings WB-300 Series Black
WB-300 Series Black is a fast-drying, glossy finished water based anti-corrosive coating for superior protection of steel pipe. It can be applied over properly prepared new and reconditioned pipe.
Product families
- Pipes & Plumbing
Other characteristics
- Features
Corrosion Resistant, Fast Drying, Glossy Surface Aspects, Good Adhesion, High Impact Resistance, Outdoor Durability
- Product Type
- Coating, Lacquers, Waterborne Coating
- Coating
- Lacquers
- Waterborne Coating
- Application Area
- Pipes
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Galvanized Steel, Metal, Steel
- Markets
- Building & Construction
- Storage
Recommended stored in covered area or inside above 55°F. Keep container out of direct sun exposure above 100°F for long periods of time. Do not allow water to puddle on top of containers. Container should be sealed tightly as evaporation of certain components may occur and change PH and viscosity, effecting performance.
- PACKAGING
- 2531 lbs Tote / 519 lbs Drum / 43.75 lbs Pail
- Resistance
WB-300 Series Black Water Based Coating is designed for exposures to mild chemical fumes under typical atmospheric conditions.
- Shelf LIfe
- 1 year when stored inside at 55°F to 70°F.
- Technology
- Ready-to-Use Products
- Typical Uses
Excellent exterior durability, impact resistance and adhesion for line pipe, drill pipe, casing pipe, tubing and structural steel. Excellent long term protection for stored pipe.
- Film Thickness
Two coats are recommended over properly prepared steel substrates.
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Pencil Hardness (Ambient Cure) | B | — | — |
| Adhesion | 300.0 | psi | ASTM D 4541 |
| Temperature Resistance (Non-immersion, Continuous) | 250.0 | °F | — |
| Temperature Resistance (Non-immersion, Non-continuous) | 300.0 | °F | — |
| Theoretical Solids (Volume, Mixed Material) | 28.2 | % | — |
| Theoretical Coverage (Mixed Gallon, 1 mil WFT) | 785.0 | sq. ft. | — |
| Theoretical Coverage (1 mil DFT) | 397.0 | sq. ft. | — |
Table 2 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry Film Thickness | 1.0 | mil/coat |
| Wet Film Thickness | 2.2 | mils/coat |
| Flash Point | min. 204 | °F |
