To catalogue
Wohl Coatings WB-300 Series Clear
WB-300 Series Clear is a water based coating for good protection of steel pipe. It can be applied over lightly rusted pipe, new and reconditioned pipe.
Product families
Ready-to-Use Products — Paints & Coatings
- Lacquers
Other characteristics
- Features
- Good Adhesion, Outdoor Durability
- Product Type
- Coating, Lacquers, Waterborne Coating
- Coating
- Lacquers
- Waterborne Coating
- Application Area
- Pipes
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Galvanized Steel, Metal, Steel, Wood
- Markets
- Building & Construction
- Paints & Coatings
- PACKAGING
- 2531 lbs Tote / 519 lbs Drum / 43.75 lbs Pail
- Resistance
WB-300 Series Clear Water Based Coating is designed for exposures to mild chemical fumes under typical atmospheric conditions.
- Shelf LIfe
- 1 year when stored inside at 55°F to 70°F.
- Technology
- Ready-to-Use Products
- Typical Uses
Excellent exterior durability and adhesion over most metal, wood, and concrete surfaces.
- Film Thickness
Two coats are recommended over properly prepared steel substrates.
- Primer/Substrates
WB-300 Series Clear Water Based Pipe Coating may be applied directly to properly prepared steel substrates and weathered galvanized steel.
- Application Methods
- Brush
- Roller
- Spray
- Ready to Use Product Features
- Good Adhesion
- Outdoor Durability
- Compatible Substrates and Surfaces
- Concrete
- Galvanized Steel
- Metal
- Steel
- Wood
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Pencil Hardness (Ambient Cure) | B | — | — |
| Adhesion | 300.0 | psi | ASTM D 4541 |
| Temperature Resistance (Non-immersion, Continuous) | 250.0 | °F | — |
| Temperature Resistance (Non-immersion, Non-continuous) | 300.0 | °F | — |
| Theoretical Solids (Volume, Mixed Material) | 49.4 | % | — |
| Theoretical Coverage (Mixed Gallon, 1 mil WFT) | 793.0 | sq. ft. | — |
| Theoretical Coverage (1 mil DFT) | 397.0 | sq. ft. | — |
Table 2 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Dry Film Thickness | 1.0 | mil/coat |
| Wet Film Thickness | 2.2 | mils/coat |
| Flash Point | min. 204 | °F |
