Wohl Coatings DP-505 Dipping Primer
DP-505 Dipping Primer is an excellent corrosion resistant primer. This product features excellent pigment suspension and stability properties as required for dip tank operation. It possesses excellent exterior durability and adhesion over most metal, wood and concrete surfaces. Excellent shop applied primer for fabricated steel and structural metal.
Product families
Applications
- Concrete Coatings & Stains
Product Families
- Primers & Sealers
Other characteristics
- Features
Corrosion Resistant, Good Adhesion, Outdoor Durability; An excellent corrosion resistant primer. A major use for this product has been the initial coating of fabricated steelsign posts and bollards for many national companies.; It possesses excellent exterior durability and adhesion over most metal, wood, and concrete surfaces.; Excellent shop applied primer for fabricated steel and structuralsteel.
- Product Type
- Primer
- Application Area
- Signage
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Galvanized Steel, Metal, Steel, Wood
- Markets
- Paints & Coatings
- PACKAGING
- 12 lbs / 60 lbs
- Resistance
BB-505 is designed for exposures to mild chemical fumes under typical atmospheric conditions.
- Shelf LIfe
- 3 years when stored inside at 40°F to 110°F
- Technology
- Ready-to-Use Products
- Typical Uses
Excellent exterior durability and adhesion over most metal, wood, and concrete surfaces.
- Primer/Substrates
BB-505 Shop Primer may be applied directly to properly prepared steel substrates and weathered galvanized steel
- Application Methods
- Brush
- Roller
- Spray
- Ready to Use Product Features
- Corrosion Resistant
- Good Adhesion
- Outdoor Durability
- Compatible Substrates and Surfaces
- Concrete
- Galvanized Steel
- Metal
- Steel
- Wood
Technical data
Table 1 of 2
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Pencil Hardness (Ambient Cure) | Soft to 4B | — | — |
| Adhesion | 300.0 | psi | ASTM D 4541 |
| Temperature Resistance (Non-immersion, Continuous) | 250.0 | °F | — |
| Temperature Resistance (Non-immersion, Non-continuous) | 300.0 | °F | — |
| Theoretical Solids (Volume, Mixed Material) | 40 - 42 | % | — |
| Theoretical Coverage (Mixed Gallon, 1 mil) | 651.0 | sq. ft. | — |
| Volatile Organic Content (Unthinned Ready to Apply) | 2.8 | lbs./gal. | — |
| Theoretical Solids (Weight, Mixed Material) | 57 - 59 | % | — |
| Theoretical Coverage (1 mils DFT) | 651.0 | sq. ft. | — |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dry Film Thickness | 1.5 - 2.5 | mils/coat | — |
| Wet Film Thickness | 3 - 5 | mils/coat | — |
| Flash Point | 45.0 | °F | Setaflash |
