Wohl Coatings BB-124HB VOC
- Chemical Family
- Bituminous Coal
BB-124HB VOC is a tough, durable bituminous based coating for lasting protection of steel pipe, tanks, flanges, bolts and other bare metal structures. The coating particularly suited for quick repairs. Low VOC and meets all requirements of any county in the United States. It can be applied to new and reconditioned pipe. When applied over light rust it will stop further deterioration. Meets requirements of an architectural coating and/or an Industrial Maintenance Coating. BB-124HB VOC is for crack repair, FG lay up, and adhesive.
Product families
- Protective Coatings
Other characteristics
- Features
Durable, Good Adhesion, Improved Toughness, Low VOC, Outdoor Durability
- Product Type
- Coating
- Application Area
- Bolts, Flanges, Pipes, Tanks
- Bolts
- Flanges
- Pipes
- Tanks
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Galvanized Steel, Metal, Steel, Wood
- Markets
- Building & Construction
- Paints & Coatings
- PACKAGING
- 500 lbs / 50 lbs / 9.0 lbs
- Resistance
BB-124BHBWB is designed for exposures to mild chemical fumes under typical atmospheric conditions.
- Shelf LIfe
- 2 years when stored inside at 40°F to 110°F.
- Technology
- Ready-to-Use Products
- Typical Uses
Excellent exterior durability and adhesion over most metal, wood, and concrete surfaces. Can be used above and below grade.
- Primer/Substrates
BB-124BHBWB Coating may be applied directly to properly prepared steel substrates, weathered galvanized steel and concrete surfaces. All surfaces should be free of oil or dirt.
- Application Methods
- Brush
- Roller
- Spray
- Ready to Use Product Features
- Durable
- Good Adhesion
- Improved Toughness
- Low VOC
- Outdoor Durability
- Compatible Substrates and Surfaces
- Concrete
- Galvanized Steel
- Metal
- Steel
- Wood
Technical data
Table 1 of 2
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Pencil Hardness (Ambient Cure) | Soft to 4B | — | — |
| Adhesion | 300.0 | psi | ASTM D 4541 |
| Temperature Resistance (Non-immersion, Continuous) | 250.0 | °F | — |
| Temperature Resistance (Non-immersion, Non-continuous) | 300.0 | °F | — |
| Theoretical Solids (Volume, Mixed Material) | 68 - 70 | % | — |
| Theoretical Coverage (Mixed Gallon, 1 mil) | 1100.0 | sq. ft. | — |
| Volatile Organic Content (Unthinned Ready to Apply) | 50.0 | g/l | — |
| Volatile Organic Content (Less Exempt) | 99.0 | g/l | — |
| Theoretical Coverage (30 mils DFT) | 35.0 | sq. ft. | — |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dry Film Thickness | 30 - 60 | mils/coat | — |
| Wet Film Thickness | 60 - 120 | mils/coat | — |
| Flash Point | 45.0 | °F | Setaflash |
