To catalogue
Wohl Coatings MM-243 Black Bituminous High Build Pipe Coating
MM-243 Black Bituminous High Build Pipe Coating is a special version of our regular pipe coatings. It is a heavy duty coating that meets AASHTO M243-96 (2004) for field applied coating of corrugated metal structural pipe, pipe-arches and tunnels.
Product families
Ready-to-Use Products — Paints & Coatings
- Protective Coatings
Other characteristics
- Features
- Heavy Duty, Outdoor Durability
- Product Type
- Coating
- Application Area
- Bolts, Flanges, Pipes, Screws
- Bolts
- Flanges
- Pipes
- Screws
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Galvanized Steel, Metal, Steel, Wood
- Markets
- Building & Construction
- Paints & Coatings
- PACKAGING
- 60 lbs / 12 lbs
- Shelf LIfe
- 3 years when stored inside at 40°F to 110°F
- Technology
- Ready-to-Use Products
- Typical Uses
Field-Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches. Used to coat newly joined flanges or welds before pipe is buried in the field. Used to coat bolts and nuts and keep them from rusting which allows them to be removed years later. Excellent exterior durability and adhesion over most metal, wood, and concrete surfaces.
- Primer/Substrates
May be applied directly to properly prepared steel substrates, galvanized steel, and concrete.
- Application Methods
- Brush
- Roller
- Spray
- Ready to Use Product Features
- Heavy Duty
- Outdoor Durability
- Compatible Substrates and Surfaces
- Concrete
- Galvanized Steel
- Metal
- Steel
- Wood
Technical data
Table 1 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Immersion Test (10% Hydrochloric Acid, 24 hrs, 77°F) | No Effect | — |
| Immersion Test (10% Sulphuric Acid, 24 hrs, 77°F) | No Effect | — |
| Immersion Test (10% Sodium Hydroxide, 24 hrs, 77°F) | No Effect | — |
| Theoretical Solids (Volume, Mixed Material) | 61 - 63 | % |
| Theoretical Coverage (Mixed Gallon, 1 mil) | 994.0 | sq. ft. |
| Volatile Organic Content (Ready to Apply, No Thinner Added, Less Exempt) | 2.33 | lbs./gal. |
| Theoretical Coverage (1 mils DFT) | 994.0 | sq. ft. |
| Theoretical Coverage (50 mils DFT) | 20.0 | sq. ft. |
Table 2 of 2
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dry Film Thickness | 60.0 | mils/coat | — |
| Wet Film Thickness | 70 - 80 | mils/coat | — |
| Flash Point | 75.0 | °F | Setaflash |
