IMCO Technologies 465 HIGH SOLIDS WATER REPELLENT SEALER
- Chemical Family
- Siloxanes
465 HIGH SOLIDS WATER REPELLENT SEALER is a clear, ready-to-use, solvent-free siloxane sealer that cross-links with the substrate to form an insoluble water barrier providing surface and subsurface protection.
Product families
Applications
- Coatings & Markings
Product Families
- Primers & Sealers
Other characteristics
- Features
Acid Resistant, Breathable, Excellent Water Repellency , Good Penetration, Good UV Stability, High Solids Content, Long Term Protection, Road Salt Resistant, Water Resistant
- Product Type
- Sealer, Waterborne Coating
- Sealer
- Waterborne Coating
- Application Method
- Spray
- Compatible Substrates & Surfaces
- Concrete
- Color
- Transparent
- Markets
- Building & Construction
- Storage
Treated surfaces should be protected from rain and foot traffic for 4 - 6 hours following application and vehicular traffic for 24 hours following application.
- Basic Uses
The 465 is designed to form a deeply penetrating water repellant seal on most alkaline surfaces including concrete flatwork andparking structures
- Shelf LIfe
6 months at 5ºC to 24ºC when stored away from sun and direct heat.
- Availability
Available in 20L pail and 200L drums. Coverage is dependent on porosity of the substrate, however a coverage of 20 to 40 SF/L can be expected on most common construction materials.
- Technology
- Ready-to-Use Products
- Packaging Type
- Drums
- Pails
- Labeling Claims
- Non-Toxic
- Odor-free
- Solvent-free
- Major Advantages
Water-based clear - will not discolor substrate (note: 465 cannot be tinted); Odor-free and non-toxic; Breathable; Prolongs surface life; Deep penetration and quick film formation; Ultra-violet stable; Stops intrusion of de-icing salts, acids and water; Reduces chloride penetration
- Special Handling
465 High Solids Water Repellent Sealer may slowly evolve hydrogen gas. In the presence of acids, bases, heavy metals or theircompounds, the rate of evolution is increased. Work areas must be adequately ventilated to prevent the accumulation ofhydrogen. Keep the material away from sparks, heat and open flames. Direct eye contact may cause slight discomfort which isrelieved by flushing with water.
- Application Methods
- Spray
- Application Instructions
All surfaces must be sound, clean and free of all contaminants that would prevent penetration. New concrete should be allowedto thoroughly cure before application. Older concrete should be washed with a high pressure washer and/or cleaning agents if there is build up from years of usage.. Surface may be slightly damp, however; an excess of moisture on the surface will impede penetration. 465 is supplied ready touse, no dilution is necessary and is best applied by airless sprayer with fan type spray nozzle. Clean up with water. Exercisecaution around glass as 465 will etch the glass. Clean with soapy water immediately. A test application is recommended on thesurface, using the same equipment as you would for the job, to ensure compatibility and to see if desired waterproofing resultswill be acceptable. This will also be useful in determining the final application rate and proper procedure.
- Ready to Use Product Features
- Acid Resistant
- Breathable
- Excellent Water Repellency
- Good Penetration
- Good UV Stability
- High Solids Content
- Long Term Protection
- Road Salt Resistant
- Compatible Substrates and Surfaces
- Concrete
