IMCO Technologies 510A ALUMINIZED URETHANE PRIMER
- Chemical Family
- Urethanes
510A ALUMINIZED URETHANE PRIMER is an extremely durable, single component protective coating system having unsurpassed adhesion to steel, aluminum and fiberglass.
Product families
- Primers & Sealers
- Protective Coatings
Other characteristics
- Features
Abrasion Resistant, Acid Resistant, Alkali Resistant, Durable, Flexible, Good Adhesion, Salt Water/Spray Resistant, Self-Priming
- Product Type
- 1K (1 component) Coating, Primer
- 1K (1 component) Coating
- Primer
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Aluminum, Fiberglass, Metal, Steel
- Primer
- None required Self priming on most substrates
- Storage
Keep in tightly closed containers to prevent contamination with moisture. Store in a cool, dry place, preferably under 27ºC to insure stability of at least 6 months in original unopened containers.
- PACKAGING
- 4L pail
- 20L pail
- 200L drum
- Basic Uses
The 510A ALUMINIZED URETHANE PRIMER is a single component aluminized urethane with excellent adhesion to hand cleaned steel, fiberglass, aluminum and aged paints. Recommended as an aluminum self prime finish coat for normal weather and mild marine exposures and as an anti-bleed primer for chemical resistant finish coats. The 510A ALUMINIZED URETHANE PRIMER can be top-coated with almost any type of finish system if a color coat is required.
- Shelf LIfe
3 months at 5 to 24°C, inside storage, out of sun and direct heat.
- Technology
- Ready-to-Use Products
- Major Advantages
Hard, abrasive resistant and flexible.; Outstanding adhesion to steel, fiberglass, galvanized, aluminum, tightly adhered old paint etc.; Will not soften solvent sensitive coatings, alkyds, vinyls, acrylics etc.; Good resistance to mild acids, alkalis and fresh and salt water.; Can be applied at sub-zero temperatures as low as -10°C (14°F).
- Special Handling
Use normal precautions such as gloves, coveralls, eye protection and face mask with, cartridges approved for inorganic vapors. When spraying, free isocyanates may be present; use air-fed, full face mask if in enclosed area. May cause sensitization in susceptible individuals. Protect skin with barrier creams. Wash skin contact areas thoroughly with lukewarm water. Eye contact; flush with copious amounts of water and obtain medical attention immediately. Maintain adequate ventilation in enclosed areas.
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 1
15 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point | 40 (104) | °C (°F) |
| Solid by Volume | 50.0 | % |
| Cure Time( Touch) | 0.5 hours | hours |
| Cure Time( Recoat) | 1-2 hours | hours |
| Cure Time( Mar-free) | 4-5 hours | hours |
| Sward Hardness | 34.0 | — |
| Taber Abrasion CS-17 | 18.0 | mg loss |
| Reverse Impact | min. 160 | inlb |
| Direct Impact | min. 160 | inlb |
| Pot Life | 4.0 | hours |
| Net Weight | 1.10 - 1.20 | kg/L |
| Application temperature | -10C(14) | °C (ºF) |
