IMCO Technologies 510S URETHANE MAINTENANCE COATING SEALER
- Chemical Family
- Urethanes
510 Moisture Cure Urethanes are extremely durable, single component maintenance coating systems. They have unsurpassed adhesion to a variety of substrates.
Product families
- Protective Coatings
Other characteristics
- Features
Abrasion Resistant, Acid Resistant, Alkali Resistant, Durable, Flexible, Food Contact Acceptable, Low Temperature Curing, Medium Hardness, Salt Water/Spray Resistant
- Product Type
- 1K (1 component) Coating, Sealer
- 1K (1 component) Coating
- Sealer
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel, Wood
- Storage
Keep in tightly closed containers to prevent contamination with moisture. Store in a cool, dry place, preferably under 27ºC (81ºF)to insure stability of at least 6 months in original unopened containers.
- Clean Up
- With 585 URETHANE SOLVENT before coatings dry
- Basic Uses
510C URETHANE MAINTENANCE COATING is an excellent single component clear or color coat for the protection of wood, concrete or steel in harsh industrial environments. For indoor use only. 510S URETHANE MAINTENANCE COATING is an extremely tough clear concrete sealer. For indoor use only.
- Technology
- Ready-to-Use Products
- Steel Coating
Apply the 510C in multiple coats over sandblasted and primed steel. Prime using 510A ALUMINIZED URETHANEPRIMER. 510C can also be used as the chemical resistant urethane finish coat over a variety of priming systems,including zinc rich primers.
- Packaging Type
- Drums
- Pails
- Major Advantages
Hard, abrasive resistant and flexible; Outstanding adhesion: concrete, galvanized steel, wood, urethane foam, tightly adhered old paint etc.; Will not soften solvent sensitive coatings, alkyds, vinyls, acrylics; Good resistance to acids, alkalis and fresh and salt water.; Can be applied at sub-zero temperatures -10°C (14°F); Approved by Canadian Food Inspection Agency (CFIA) for incidental food contact.
- Special Handling
Use normal precautions such as gloves, coveralls, eye protection and face mask with, cartridges approved for inorganic vapors. When spraying, free isocyanates may be present; use air-fed, full face mask. May cause sensitization in susceptible individuals. Protect skin with barrier creams. Wash skin contact areas thoroughly with lukewarm water. Eye contact; flush with copious amounts of water and obtain medical attention immediately. Maintain adequate ventilation in enclosed areas.
- Ready to Use Product Features
- Abrasion Resistant
- Acid Resistant
- Alkali Resistant
- Durable
- Flexible
- Food Contact Acceptable
- Low Temperature Curing
- Medium Hardness
- Compatible Substrates and Surfaces
- Concrete
- Metal
- Steel
- Wood
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point:: | 40 (104) | °C (°F) |
| Solid by Volume | 33.0 | % |
| Cure Time( Touch) | 0.5 hours | hours |
| Cure Time( Recoat) | 1-2 hours | hours |
| Cure Time( Mar-free) | 4 - 5 hours | hours |
| Sward Hardness | 34.0 | — |
| Taber Abrasion: | 18.0 | mg loss |
| CS-17 | min. 160 | inlb |
| Reverse Impact | min. 160 | inlb |
| Direct Impact | 4.0 | hours |
| Pot Life | 510C 1.2 kg/L (10.4 lbs/gal) | — |
| Net Weight: | 1.1 (9.2) | kg/L |
