467 KLEER -O-SEAL™ 0.55
- Chemical Family
- Acrylics & Acrylates
KLEER-O-SEAL™ employs nanotechnology and the next generation blend of microscopic VOC compliant chemicals that produce deep penetration in concrete. KLEER-O-SEAL™ reacts below the surface to create a durable seal and allow long-term successful results in all applications including difficult UV and freeze thaw environments.
Product families
Applications
- Fence Decks & Rails
Product Families
- Primers & Sealers
Other characteristics
- Brand
- 467 KLEER -O-SEAL
- Features
Chemical Resistant, Corrosion Resistant, Excellent Seal Properties, Fast Drying, Freeze/Thaw Stability, Good Penetration, Long Term Protection, Mildew Resistant, Oil Resistant, Road Salt Resistant, UV Resistant, Water Resistant
- Product Type
- Sealer
- Compatible Substrates & Surfaces
- Brick, Concrete, Stone
- Safety
Use the same precautions as when working with conventional concrete. Although the materials are non-toxic it is good practice to protect exposed skin areas and towear a face mask to prevent inhalation of the aggregate particles. A small amount of ammonia gas is released during the cure, venting of indoor areas may be required in some applications, although this will present noproblems outdoors. Neither of the components nor the mixed product are flammable.
- Markets
- Building & Construction
- Clean Up
- Mineral Spirits
- Coverage
- Poured concrete, precast, exposed aggregate
- Stone & Brick 200, 250 SQ FT/ GAL
- Block 150, 200 SQ FT/ GAL
- Basic Uses
KLEER-O-SEAL™ should be used wherever quality sealing, concrete protection and low maintenance are desired. Provides a breathable hydrophobic sealer to all concrete and untreated masonry surfaces, good for all concrete, block, stone, brick, sidewalks, ramps, parking decks, stairs, and stucco.
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Major Advantages
Low maintenance; One coat system; Deep penetration into surface up to 1"; Chemically reacts below the surface and in the top matrix; Water, salt and chemical resistance; Oil and gas resistance; Carbonation control; Corrosion and mildew resistance; Prevents spalling from freeze thaw; Reduces or eliminates scaling; Protects from UV damage; Quick drying for early return to service; Increases life expectancy of concrete; Application temperatures 32º F - 0ºC to 95 ºF - 35 ºC; VOC compliant
- Special Handling
- Store at 32ºF up to 90ºF.
- Do not dilute.
- Do not apply if rain is eminent.
- Do not puddle product.
- Avoid open flame on spark.
- Application Instructions
Existing Concrete & Masonry Surfaces - Clean all surfaces of foreign materials and test for absorption with drops of water prior to application of KLEER-O-SEAL™ . Power wash if necessary and allow to fully dryprior to application. On horizontal surfaces apply at rate of 200 SQ FT/GAL making sure there are no puddles on the surface. Apply at a rate of 200 - 250 SQ FT/GAL with low pressure sprayer .Can be rolled onbrushed on as required. Flood vertical applications 6" down from application point working downward. Donot apply if weather is undesirable. Cover all shrubs, lawns, plants prior to coating. Protect glass, aluminum, asphalt or any coated surface. Allow to dry, open to traffic, only 1 coat is required.. New concrete - Allow 28 day cure prior to application of KLEER-O-SEAL™ follow above application instructions.
- Technical and Product Data
NCHRP Report 244 acceleration weathering ASTM C 672 50 Cycles.
- Ready to Use Product Features
- Chemical Resistant
- Corrosion Resistant
- Excellent Seal Properties
- Fast Drying
- Freeze/Thaw Stability
- Good Penetration
- Long Term Protection
- Mildew Resistant
- Compatible Substrates and Surfaces
- Brick
- Concrete
- Stone
