To catalogue
FLUORONOID® FL 106
- Chemical Family
- Fluoropolymers
FLUORONOID® FL 106 is a Bronze and molybdenum disulphide filled PTFE.
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Oil, Gas & Mining
- Other Oil Gas & Mining Applications
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- FLUORONOID
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Fillers Included
- Bronze, Molybdenum Disulfide
- Bronze
- Molybdenum Disulfide
- Markets
- Industrial
- Features
Addition of bronze to PTFE increases hardness and compressive strength, provides better dimensional stability and lowers creep, cold flow and wear. It also increases thermal and electrical conductivity.. Addition of molybdenum disulphide improves hardness and stiffness and lowers break-in wear and starting friction.
- Technology
- Plastics
- Material Features
- Dimensional Stability
- Electrically Conductive
- Good Compressive Strength
- Good Stiffness
- Good Thermal Conductivity
- High Hardness
- Low Creep
- Low Flow
- Typical Applications
Typical applications include self-lubricating bearings, compressor rings, seals and valve seats.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- TÜV Approved
- Plastics and Elastomers End Uses
- Bearing Bushes
- Bearings
- Gaskets
- O Rings
- Pipe Seals
- Seats
- Tubes
- Valve Seats
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 3.7 ± 0.05 | — | BS EN ISO 13000-2 |
| Tensile Strength | min. 12 | Mpa | BS EN ISO 13000-2 |
| Elongation | min. 90 | % | BS EN ISO 13000-2 |
| Hardness | 62 - 70 | Shore D | BS EN ISO 13000-2 |
| Maximum Working Temperature | 260.0 | °C | BS EN ISO 13000-2 |
