To catalogue
FLUORONOID® FL 105
- Chemical Family
- Fluoropolymers
FLUORONOID® FL 105 is a glass fiber filled PTFE. This material may be inert gas sintered to further improve creep properties and reduce porosity and gas permeability. There will be a consequent loss of tensile properties.
Product families
Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Oil, Gas & Mining
- Other Oil Gas & Mining Applications
Automotive & Transportation — Transportation
- Aerospace & Aviation
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- FLUORONOID
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Fillers Included
- Glass Fiber
- Markets
- Automotive & Transportation
- Industrial
- Regulatory
FL105 is manufactured in accordance with BS 6564: Part 3.
- Formulations
- 75% PTFE, 25% GLASS FIBER (BY WEIGHT)
- Technology
- Plastics
- Material Features
- Excellent Dielectric Properties
- Good Compressive Strength
- High Temperature Resistance
- Low Friction
- Low Gas Permeability
- Low Porosity
- Non Stick
- Temperature Resistance
- Typical Applications
Glass fiber is the most commonly used filler for sealing applications. It gives improved compression and wear properties.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- TÜV Approved
- Plastics and Elastomers End Uses
- Aerospace Applications
- Bearing Bushes
- Bearings
- Gaskets
- Seats
- Tubes
- Valves
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 2.19 - 2.27 | — | BS EN ISO 13000-2 |
| Tensile Strength | min. 15.7 | Mpa | BS EN ISO 13000-2 |
| Elongation | min. 200 | % | BS EN ISO 13000-2 |
| Hardness | 57 - 63 | Shore D | BS EN ISO 13000-2 |
| Compressive Strength (At 10% Strain) | min. 15 | Mpa | BS EN ISO 13000-2 |
| Deformation Under Load (15MPa; 100h load; 25 h relaxation; 23°C) | 8.4 | % | BS EN ISO 13000-2 |
| Thermal Conductivity | 0.34 | W/(m·K) | BS EN ISO 13000-2 |
| Coefficient of Linear Expansion (||) | 16×10^(-5) | /°C | BS EN ISO 13000-2 |
| Volume Resistivity | 10^15 | Ω-Cm | BS EN ISO 13000-2 |
| Maximum Working Temperature | 260.0 | °C | BS EN ISO 13000-2 |
| Wear Rate | 4.8 | m3/Nm×10^(-16) | BS EN ISO 13000-2 |
