To catalogue
FLUORONOID® FL 355
- Chemical Family
- Polyether Ether Ketone (PEEK)
FLUORONOID® FL 355 is a lubricated filled PEK
Product families
Applications
Applications
- Building & Construction — Other Building & Construction Applications
Automotive & Transportation — Automotive
- Other Automotive Applications
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Oil, Gas & Mining
- Other Oil Gas & Mining Applications
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Brand
- FLUORONOID
- Polymer Name
- Polyetheretherketone (PEEK)
- Markets
- Automotive & Transportation
- Building & Construction
- Industrial
- Technology
- Plastics
- Material Features
- Good Mechanical Properties
- High Hardness
- High Temperature Strength
- Low Friction
- Lubricated
- Radiation Resistant
- Wear Resistant
- Typical Applications
Low friction grade of filled PEEK for production of plain bearings, low friction valve seats etc.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- TÜV Approved
- Plastics and Elastomers End Uses
- Bearings
- Valve Seats
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity (Injection Moulded) | 1.46 | — | ISO R1183 |
| Specific Gravity (Extruded) | 1.44 - 1.48 | — | H-WI-28 |
| Specific Gravity (Compression Mould) | 1.44 - 1.48 | — | H-WI-28 |
| Tensile Strength (Injection Moulded) | 131.0 | Mpa | ISO R527 |
| Tensile Strength (Extruded) | 75 - 90 | Mpa | H-WI-28 |
| Tensile Strength (Compression Mould) | min. 45 | Mpa | H-WI-28 |
| Elongation (Injection Moulded) | 3.0 | % | ISO R527 |
| Elongation (Extruded) | min. 3 | % | H-WI-28 |
| Elongation (Compression Mould) | min. 3 | % | H-WI-28 |
| Coefficient of Friction (at 20°C, 30.5m / min, 70Kg Load) | 0.11 | — | — |
| Limiting PV (at 20°C, 30.5m/min) | 1084.0 | (MPa)(m/min) | — |
| Maximum Temperature | 260.0 | °C | — |
