To catalogue
FLUORONOID® FL 381
FLUORONOID® FL 381 is a Acetal – POM Copolymer
Product families
Applications
Automotive & Transportation — Automotive
- Other Automotive Applications
- Seating
Building & Construction — Building Materials
- Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
Industrial — Oil, Gas & Mining
- Enhanced Oil Recovery
Product Families
Plastics — Engineering & Specialty Polymers
- Polyacetals
Other characteristics
- Brand
- FLUORONOID
- Polymer Name
- Polyacetal Copolymer (POM)
- Markets
- Automotive & Transportation
- Building & Construction
- Industrial
- Technology
- Plastics
- Material Features
- Enhanced Physical Properties
- Good Abrasion Resistance
- Good Toughness
- High Modulus
- High Strength
- Low Creep
- Low Water Absorption
- Wear Resistant
- Typical Applications
A tough plastic with high strength and low creep tendencies, used for the manufacture of seats, bearings, gears, guides and pump components etc. Exhibits very low water absorption and excellent abrasion and wear resistance.
- Certifications and Compliance
- ISO 14001
- ISO 9001
- TÜV Approved
- Plastics and Elastomers End Uses
- Bearings
- Gears
- Pump Parts
- Rod Guides
- Seats
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity | 1.41 | — |
| Tensile Strength at Yield | 65.0 | Mpa |
| Elongation at Break | 25 - 45 | % |
| Hardness (Rockwell) | M84 | — |
| Maximum Service Temperature (Continuous) | 105.0 | °C |
| Maximum Service Temperature (Intermittent) | 140.0 | °C |
| Minimum Service Temperature | (-50) | °C |
| Vicat Softening Temperature | 150.0 | °C |
| Water Absorption (in water at 23°C) | 0.8 | % |
| Water Absorption (in air at 23°C) | 0.2 | % |
| Coefficient of Linear Expansion (23 - 60°C) | 110x10-6 | K^(-1) |
| Coefficient of Thermal Expansion (23 - 100°C) | 125x10-6 | K^(-1) |
