Tru-Motion™ H3617
- CASE Ingredients Features
- Chemical ResistanceGood Color FastnessLow Temperature PerformanceOutdoor DurabilityWater Resistance
- Chemical Family
- Isocyanates, Polyurethanes (PU)IsocyanatesPolyurethanes (PU)
Tru-Motion™ H3617 is the fastest reacting aliphatic binder in the Tru-Motion aliphatic series. It is designed for installation at low temperature and low humidity. Tru-Motion H3617 is not appropriate for use at high temperatures. Tru-Motion H3617 exhibits excellent color fastness and exterior durability allowing the use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion H3617 exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Consumer Goods — Sports & Recreation
- Floor Coatings
- Floor Coatings
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Tru-Motion
- End Uses
- Solventless & High Solids Coating
- Features
Chemical Resistance, Good Color Fastness, Low Temperature Performance, Outdoor Durability, Water Resistance
- Markets
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Storage
Tru-Motion H3617 should be stored in cool, dry surroundings. Avoid prolonged storage temperatures over 90° F or below 40° F. Under conditions of proper storage, storage life of the product in original, factory sealed containers is 3 months.
- PACKAGING
Tru-Motion H3617 is available in 55-gallon closed head drums with a net weight of 450 lbs. and 5-gallon pails with a net weight of 43 lbs. Returnable and one-way 250-gallon mini-bulk containers are available on a special order basis.
- Appearance
- Light yellow viscous fluid
- Processing
Caution : Any colored EPDM granule mixture used with Tru-Motion H3617 should be evaluated for color change and reactivity rate before installation. Bromine will discolor all installed PIP surfacing.
- Cure
- Moisture Cure
- Coating Type
- Solventless & High Solids Coating
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Pails
- Labeling Claims
- Solvent-free
- Toluene Diisocyanate (TDI) free
- Safety and Handling
Wear proper protective equipment at all times.; Tru-Motion H3617 is a primary skin irritant and can cause sensitization dermatitis. Avoid contact with skin and eyes.; Wear proper protective equipment at all times when handling Tru-Motion H3617.; In the event of eye contact, flush eyes thoroughly with water and seek medical attention.; Pressure can build up in new and previously opened containers, open all containers carefully.; Protect open containers from moisture.; Dispose of contaminated materials and empty containers in accordance with Federal, State and Local regulations
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 8.6 - 8.9 | lbs./Gal. | — |
| Viscosity | 3,000 - 5,000 | cps | — |
| Free NCO | 7.0 - 8.2 | % | — |
| Tensile Strength | 2700 - 3300 | psi | ASTM D 412 |
| Elongation | 450 - 550 | % | ASTM D 412 |
| Die C Tear | 234 - 286 | pli | ASTM D 624 |
| Split Tear | 50 - 60 | pli | — |
