Tru-Motion™ H3725

CASE Ingredients Features: Good Heat Stability
Chemical Family: Polyurethanes (PU)

Tru-Motion™ H3725 is a slow reacting Aromatic binder. It is designed for installation at higher temperatures and humidity. Tru-Motion™ H3725 is a 100% solids, TDI free, moisture cure polyurethane binder for use in the construction of bonded rubber granule type athletic and safety surfaces. Tru-Motion™ H3725 is TDI (Toluene Diisocyanate) free, eliminating the regulatory and construction site safety hazards associated with TDI containing systems.

Identification

CASE Ingredients Functions: Binder & Resin

Product families

Applications

Consumer Goods — Sports & Recreation

Paints & Coatings — Building & Construction

Floor Coatings

Building & Construction — Flooring & Surfaces

Floor Coatings

Product Families

CASE Ingredients — Resins & Binders

Polyurethanes (PU)

Other characteristics

Brand: Tru-Motion
End Uses: Solventless & High Solids Coating
Features: Good Heat Stability
Caution: Tru-Motion H3725 is a pure Aromatic binder and is subject to early yellowing when exposed to sunlight. Colored EPDM granule mixtures with Tru-Motion H3725 should be evaluated for color change before installation. Certain shades of blue, purple, white and gray may show objectionable color change immediately after installation. However, under normal conditions the surface will weather to an acceptable color after 30–60 days. Surfaces requiring minimum color change should be installed using Tru-Motion H3168 Aliphatic binder. Tru-Motion H3725 contains Methylene Diphenyl Diisocyanate (Aromatic). Protect opened containers from moisture. Bromine will discolor all installed PIP surfacing.
Markets: Building & Construction
Consumer Goods
Paints & Coatings
Appearance: Light Amber
Processing: Under normal conditions of installation, Tru-Motion H3725 provides excellent working life while achieving sufficient cure for secondary processing within normal construction cycles. Tru-Motion H3725 is designed to cure by reaction with atmospheric moisture. Cure rate is accelerated by high humidity and temperatures and retarded by low humidity and temperatures.
Cure: Moisture Cure
Coating Type: Solventless & High Solids Coating
Technology: CASE Ingredients
Labeling Claims: Solvent-free
Toluene Diisocyanate (TDI) free

Technical data

Table 1 of 1

6 rows

Characteristic	Value	Unit
Density	9.5	lbs./Gal.
Viscosity (78° F, 20 rpm)	3000.0	cps
NCO	9.5	%
Tensile Strength	min. 3,000	psi
Elongation	min. 350	%
Die C Tear	min. 300	pli