Tru-Motion™ H3168

CASE Ingredients Features: Chemical ResistanceGood Color FastnessOutdoor DurabilityWater Resistance
Chemical Family: Aliphatics, Isocyanates, Polyurethanes (PU)AliphaticsIsocyanatesPolyurethanes (PU)

Tru-Motion™ H3168 is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in construction of bonded rubber granule type running tracks, athletic and safety surfaces. Tru-Motion H3168 exhibits reactivity and cure rates similar to those of MDI-based binders, resulting in installation and handling characteristics typical of these systems. Tru-Motion™ H3168 exhibits excellent color fastness and exterior durability allowing the use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion™ H3168 exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion.

Identification

CASE Ingredients Functions: Binder & Resin

Product families

Applications

Consumer Goods — Sports & Recreation

Paints & Coatings — Building & Construction

Floor Coatings

Building & Construction — Flooring & Surfaces

Floor Coatings

Product Families

CASE Ingredients — Resins & Binders

Polyurethanes (PU)

Other characteristics

Brand: Tru-Motion
End Uses: Solventless & High Solids Coating
Features: Chemical Resistance, Good Color Fastness, Outdoor Durability, Water Resistance
Markets: Building & Construction
Consumer Goods
Paints & Coatings
Storage: Tru-Motion H3168 should be stored in cool, dry surroundings. Avoid prolonged storage at temperatures over 90° F or below 50° F. Under conditions of proper storage, the storage life of the product in original, factory sealed containers is 6-months.
PACKAGING: Tru-Motion H3168 is available in 55-gallon closed head drums with a net weight of 450 lbs, 5-gallon pails with a net weight of 43 lbs and IBCs with a net weight of 2,200 lbs. Returnable and one-way 250-gallon mini-bulk containers are available on a special order basis.
Appearance: Water clear viscous fluid
Processing: Caution : Any colored EPDM granule mixture used with Tru-Motion H3168 should be evaluated for color change and reactivity rate before installation. Bromine will discolor all installed PIP surfacing.
Cure: Moisture Cure
Coating Type: Solventless & High Solids Coating
Technology: CASE Ingredients
Packaging Type: Drums
Pails
Labeling Claims: Solvent-free
Toluene Diisocyanate (TDI) free
Safety and Handling: At all times, wear proper protective equipment when handling Tru-Motion H3168.; Tru-Motion H3168 is a primary skin irritant and can cause sensitization dermatitis.; Avoid contact with skin and eyes. In the event of eye contact, flush eyes thoroughly with water and seek medical attention.; Open all containers carefully as pressure can build up in new and previously opened containers.; Protect open containers from moisture.; Dispose of contaminated materials and empty containers in accordance with Federal, State and Local regulations.

Technical data

Table 1 of 2

4 rows

Characteristic	Value	Unit
Density	8.55 - 8.65	lbs./Gal.
Viscosity	3,000 - 5,000	cps
Free NCO	6.0 - 7.2	%
Solids	min. 99	% by Wt.

Table 2 of 2