Tru-Motion™ H3194
- CASE Ingredients Features
- Chemical ResistanceGood Color FastnessGood Heat StabilityOutdoor DurabilityWater Resistance
Tru-Motion™ H3194 is the slowest reacting aliphatic binder in the Tru-Motion aliphatic series. It is designed for installation at high temperature and high humidity. Tru-Motion H3194 is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in construction of bonded rubber granule type running tracks, athletic and safety surfaces. Tru-Motion™ H3194 exhibits reactivity and cure rates similar to those of MDI based binders resulting in installation and handling characteristics typical of these systems. Tru-Motion™ H3194 exhibits excellent color fastness and exterior durability allowing the use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion™ H3194 exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion.
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Consumer Goods — Sports & Recreation
- Floor Coatings
- Floor Coatings
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Tru-Motion
- End Uses
- Solventless & High Solids Coating
- Features
Chemical Resistance, Good Color Fastness, Good Heat Stability, Outdoor Durability, Water Resistance
- Markets
- Building & Construction
- Consumer Goods
- Paints & Coatings
- Storage
Tru-Motion H3194 should be stored in cool, dry surroundings. Avoid prolonged storage temperatures over 90° F or below 50° F. Under conditions of proper storage, storage life of the product in original, factory sealed containers is 3 months.
- PACKAGING
Tru-Motion H3194 is available in 55-gallon closed head drums with a net weight of 450 lbs. and 5-gallon pails with a net weight of 43 lbs. Returnable and one-way 250-gallon mini-bulk containers are available on a special order basis.
- Appearance
- Water clear viscous fluid
- Processing
Caution : Any colored EPDM granule mixture used with Tru-Motion H3194 should be evaluated for color change and reactivity rate before installation. Bromine will discolor all installed PIP surfacing.
- Cure
- Moisture Cure
- Coating Type
- Solventless & High Solids Coating
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Pails
- Labeling Claims
- Solvent-free
- Toluene Diisocyanate (TDI) free
- Safety and Handling
Wear proper protective equipment at all times.; Tru-Motion H3194 is a primary skin irritant and can cause sensitization dermatitis. Avoid contact with skin and eyes. Wear proper protective equipment at all times when; handling Tru-Motion H3194.; In the event of eye contact, flush eyes thoroughly with water and seek medical attention.; Pressure can build up in new and previously opened containers, open all containers carefully.; Protect open containers from moisture.; Dispose of contaminated materials and empty containers in accordance with Federal, State and Local regulations.
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 8.5 - 8.7 | lbs./Gal. | — |
| Viscosity | 3,500 - 4,000 | cps | — |
| Free NCO | 6.8 - 7.2 | % | — |
| Solids | min. 99 | % by Wt. | — |
| Tensile Strength | 2700 - 3300 | psi | ASTM D 412 |
| Elongation | 450 - 550 | % | ASTM D 412 |
| Die C Tear | 234 - 286 | pli | ASTM D 624 |
| Split Tear | 50 - 60 | pli | — |
