Tru-Motion™ H3219 S

CASE Ingredients Features: Chemical ResistanceGood Color FastnessOutdoor DurabilityWater Resistance
Chemical Family: Aliphatics, Isocyanates, Polyurethanes (PU)AliphaticsIsocyanatesPolyurethanes (PU)

Tru-Motion™ H3219 S is a slightly faster reacting version of Tru-Motion H3168 SS. It is designed for installation at moderate temperature and humidity. Tru-Motion™ H3219 S is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in construction of bonded rubber granule type running tracks, athletic and safety surfaces. Tru-Motion™ H3219 S exhibits reactivity and cure rates similar to those of MDI based binders resulting in installation and handling characteristics typical of these systems. Tru-Motion™ H3219 S exhibits excellent color fastness and exterior durability allowing use of light-colored EPDM granules without the objectionable yellowing encountered when using MDI and TDI binders. In addition, Tru-Motion™ H3219 S exhibits improved resistance to deterioration by water and pool chemicals, making it the surfacing material of choice in areas subject to water and chemical immersion

Identification

CASE Ingredients Functions: Binder & Resin

Product families

Applications

Consumer Goods — Sports & Recreation

Paints & Coatings — Building & Construction

Floor Coatings

Building & Construction — Flooring & Surfaces

Floor Coatings

Product Families

CASE Ingredients — Resins & Binders

Polyurethanes (PU)

Other characteristics

Brand: Tru-Motion
End Uses: Solventless & High Solids Coating
Features: Chemical Resistance, Good Color Fastness, Outdoor Durability, Water Resistance
Markets: Building & Construction
Consumer Goods
Paints & Coatings
Storage: Tru-Motion H3219 S should be stored in cool, dry surroundings. Avoid prolonged storage at temperatures over 90° F or below 50° F. Under conditions of proper storage, the storage life of the product in original, factory sealed containers is 6-months.
PACKAGING: Tru-Motion H3219 S is available in 55-gallon closed head drums with a net weight of 450 lbs and 5-gallon pails with a net weight of 43 lbs. Returnable and one-way 250-gallon mini-bulk containers are available on a special order basis.
Appearance: Water clear viscous fluid
Processing: Under normal conditions of installation, Tru-Motion H3219 S binder for granular rubber athletic surface products provides excellent work life while achieving sufficient cure for secondary processing within normal construction cycles. Tru-Motion H3219 S binder for granular rubber athletic surface products is designed to cure by reaction with atmospheric moisture. Cure rate is accelerated by high humidity and temperatures and retarded by low humidity and temperatures. Under conditions of high temperature and low humidity, water misting of the applied surfaces immediately after installation will prevent the Tru-Motion H3219 S from draining off the granular rubber components. Tru-Motion H3219 S as supplied has a work life suitable for use in safety surfaces under average conditions of temperature and humidity.. Caution : Any colored EPDM granule mixture used with Tru-Motion H3219 S should be evaluated for color change and reactivity rate before installation. Bromine will discolor all installed PIP surfacing.
Cure: Moisture Cure
Coating Type: Solventless & High Solids Coating
Technology: CASE Ingredients
Packaging Type: Drums
Pails
Labeling Claims: Solvent-free
Toluene Diisocyanate (TDI) free
Safety and Handling: Wear proper protective equipment at all times.; Avoid contact with skin and eyes.; In the event of eye contact, flush eyes thoroughly with water and seek medical attention.; Pressure can build up in new and previously opened containers, open all containers carefully.; Protect open containers from moisture.; Dispose of contaminated materials and empty containers in accordance with Federal, State and Local regulations.

Technical data

Table 1 of 2

4 rows

Characteristic	Value	Unit
Density	8.5 - 8.7	lbs./Gal.
Viscosity	3,500 - 4,000	cps
Free NCO	6.8 - 7.2	%
Solids	min. 99	% by Wt.

Table 2 of 2