Tru-Motion™ H3609

CASE Ingredients Features: Chemical ResistanceGood Color FastnessOutdoor DurabilityWater Resistance
Chemical Family: Aliphatics, Isocyanates, Polyurethanes (PU)AliphaticsIsocyanatesPolyurethanes (PU)

Tru-Motion™ H3609 is a 100% solids, aliphatic isocyanate based, moisture cure binder for use in the construction of Aquatic Surfaces using polyolefin granules. Tru-Motion™ H3609 exhibits excellent color fastness and exterior durability allowing use of light-colored polyolefin granules without the objectionable yellowing encountered when using MDI and TDI binders.

Identification

CASE Ingredients Functions: Binder & Resin

Product families

Applications

Consumer Goods — Sports & Recreation

Paints & Coatings — Building & Construction

Floor Coatings

Building & Construction — Flooring & Surfaces

Floor Coatings

Product Families

CASE Ingredients — Resins & Binders

Polyurethanes (PU)

Other characteristics

Brand: Tru-Motion
End Uses: Solventless & High Solids Coating
Features: Chemical Resistance, Good Color Fastness, Outdoor Durability, Water Resistance
Markets: Building & Construction
Consumer Goods
Paints & Coatings
Storage: Tru-Motion H3609 should be stored in cool, dry surroundings. Avoid prolonged storage at temperatures over 90° F or below 50° F. Under conditions of proper storage, storage life of the product in original, factory sealed containers is 3 months.
PACKAGING: Tru-Motion H3609 is available in 55-gallon closed head drums with a net weight of 450 lbs. and 5-gallon pails with a net weight of 43 lbs. Returnable and one-way 250-gallon mini-bulk containers are available on a special order basis.
Appearance: Viscous fluid
Processing: Under normal conditions of installation, Tru-Motion H3609 binder for granular athletic surface products provides excellent work life while achieving sufficient cure for secondary processing within normal construction cycles. Tru-Motion H3609 binder for granular athletic surface products is designed to cure by reaction with atmospheric moisture. Cure rate is accelerated by high humidity and temperatures and retarded by low humidity and temperatures.Under conditions of high temperature and low humidity, water misting of the applied surfaces immediately after installation will prevent the Tru-Motion H3609 from draining off the granular components.. Caution : Even though Tru-Motion H3609 is a pure aliphatic binder, it should be checked before exterior use. Any colored polyolefin granule mixture used with Tru-Motion H3609 should be evaluated for color change before installation.
Cure: Moisture Cure
Coating Type: Solventless & High Solids Coating
Technology: CASE Ingredients
Packaging Type: Drums
Pails
Labeling Claims: Solvent-free
Toluene Diisocyanate (TDI) free
Safety and Handling: Wear proper protective equipment at all times.; Avoid contact with skin and eyes.; In the event of eye contact, flush eyes thoroughly with water and seek medical attention.; Pressure can build up in new and previously opened containers, open all containers carefully.; Protect open containers from moisture.; Dispose of contaminated materials and empty containers in accordance with Federal, State and Local regulations.

Technical data

Table 1 of 2

3 rows

Characteristic	Value	Unit
Density	8.52	lbs./Gal.
Viscosity	6290.0	cps
Free NCO	12.3	%

Table 2 of 2