LAPOX® AH-543 (XH-80)
- CASE Ingredients Features
- Alkali ResistanceChemical ResistanceCorrosion ResistanceGood Film FormerLow ViscosityMulti-Substrate Adhesion
- Chemical Family
- Amines
LAPOX® AH-543 (XH-80) is a light colored, low viscosity phenalkamine based on cashew nut shell liquid. It can able to cure modified and unmodified epoxy resin at room temperature as well as low temperatures up to 5°C. It is able to demonstrate good curing characteristic in presence of moisture and high humid conditions. When cured with epoxy resins it provides superior corrosion protection coupled with excellent film forming ability and adhesion to variety of substrates.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Curing Agent
Product families
Applications
- Marine Coatings
- Marine Coatings
- Industrial Coatings
- Industrial Maintenance
- Primers & Lacquers
- Primers & Lacquers
- Marine
Product Families
- Functional Additives
Other characteristics
- Brand
- LAPOX
- End Uses
- Primer
- Features
Alkali Resistance, Chemical Resistance, Corrosion Resistance, Good Film Former, Low Viscosity, Multi-Substrate Adhesion
- Functions
- Curing Agent
- Compatible Polymers & Resins
- Epoxies (EP)
- Safety
Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, the resin should be washed off immediately with soap and warm water. Avoid breathing vapors, mist or gas. Please refer to the SDS for detailed safety instructions.
- Markets
- Automotive & Transportation
- Paints & Coatings
- Printing & Packaging
- PACKAGING
Lapox AH-543 (XH-80) is available in 200 kg MS | HDPE drums and 1,000 kg IBC. Other packing may be considered on request.
- Advantages
Excellent adhesion to metal and concrete Good chemical resistance to mild acids and alkalis Light color Low viscosity Moisture sensitive
- Appearance
- Yellow-brown liquid
- Processing
- Protective coating by brush, roller or spray
- Cure
- Moisture Cure
- Coating Type
- Primer
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Handling
Lapox AH-543 (XH-80) should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a shelf-life of 1 year, if stored in its original container between 18°C and 25°C away from humidity and excessive heat. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling.
- Spills and Disposal
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.
- Certifications and Compliance
- ISO 14001
- Compatible Polymers and Resins
- Epoxies (EP)
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Color | max. 15 | GS | ASTM D1544 |
| Amine value | 300 - 350 | mg KOH/g | ASTM D2073 |
| Viscosity at 25°C | 2,000 - 5,000 | m Pas | ASTM D2196 |
| Volatile Content, 105°C / 1 hours | max. 5 | % | — |
| Density | 0.97 - 0.99 | g/ml | — |
| Pot life at 25°C (Pot life of 100 g mix mass. Mixing ratio with Lapox B-11 (EEW 190) : Lapox AH-313 is 100:12 w/w) | 50 - 65 | minutes | ASTM D2471 |
| AHEW | 125 | g/eq | — |
| Recommended Ratio | 67 | w/w | — |
