LAPOX® AH-420
- CASE Ingredients Features
- Chemical ResistanceGood Color StabilityGood Surface FeelingHigh GlossHigh ReactivityLow Viscosity
- Chemical Family
- Aliphatics, AminesAliphaticsAmines
LAPOX® AH-420 is a low color, low viscosity modified cycloaliphatic amine adduct. It suitable to cure epoxy resin at ambient temperature. It provides relatively faster reactivity and short pot life when cured with unmodified epoxy resins. It is mainly recommended for solvent-free and high solids coatings, gel coats and floor toppings. Good color and color stability are the promising features of this curing agent, which produces films with non-blushing and excellent gloss.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Curing Agent
Product families
Applications
- Adhesives & Sealants — Other Adhesives & Sealants Applications; Paints & Coatings — Other Paints & Coatings Applications
- Other Flooring & Surface Applications
Product Families
- Functional Additives
Other characteristics
- Brand
- LAPOX
- End Uses
Sol-Gel Coating, Solventless & High Solids Coating, Top Coat
- Features
Chemical Resistance, Good Color Stability, Good Surface Feeling, High Gloss, High Reactivity, Low Viscosity
- Functions
- Curing Agent
- Compatible Polymers & Resins
- Epoxies (EP)
- Safety
Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, the resin should be washed off immediately with soap and warm water. Avoid breathing vapors, mist or gas. Please refer to the SDS for detailed safety instructions.
- Markets
- Adhesives & Sealants
- Building & Construction
- Paints & Coatings
- PACKAGING
Lapox AH-420 is available in 200 kg MS | HDPE drums and 1,000 kg IBC. Other packing may be considered on request
- Advantages
Faster reactivity Good chemical resistance High gloss Low viscosity
- Appearance
- Pale-yellow liquid
- Processing
- Spray, roller or brush
- Coating Type
- Sol-Gel Coating
- Solventless & High Solids Coating
- Top Coat
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Handling
Lapox AH-420 should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a shelf-life of 1 year, if stored in its original container between 18°C and 25°C away from humidity and excessive heat. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling.
- Spills and Disposal
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.
- Certifications and Compliance
- ISO 14001
- Compatible Polymers and Resins
- Epoxies (EP)
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Color | max. 3 | GS | ASTM D1544 |
| Amine value | 320 - 340 | mg KOH/g | ASTM D2073 |
| Viscosity at 25°C | 40 - 60 | m Pas | ASTM D2196 |
| Pot life at 25°C (Pot life of 100 g mix mass. Mixing ratio with Lapox B-11 (EEW 190) : Lapox AH-313 is 100:12 w/w) | 25 - 40 | Minutes | ASTM D2471 |
| AHEW | 91 | g/eq | — |
| Recommended Ratio | 48 | w/w | — |
