LAPOX® AH-711
- CASE Ingredients Features
- Corrosion ResistanceExcellent AdhesionGood Peeling StrengthHigh ViscosityImproved FlexibilityLonger Performance LifeMulti-Substrate Adhesion
- Chemical Family
- Amides, Fatty AcidsAmidesFatty Acids
LAPOX® AH-711 is a high viscosity polyaminoamide hardener based on dimer fatty acid and aliphatic polyamine. It is designed to use with liquid or epoxy resin solutions (type-1) to produce protective and decorative solvent based coatings with an excellent flexibility and adhesion to most substrates.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Curing Agent
Product families
Applications
- Marine Coatings
- Marine Coatings
- Industrial Coatings
- Industrial Maintenance
- Primers & Lacquers
- Primers & Lacquers
- Marine
Product Families
- Functional Additives
Other characteristics
- Brand
- LAPOX
- End Uses
- Primer, Solventborne Coating
- Features
Corrosion Resistance, Excellent Adhesion, Good Peeling Strength, High Viscosity, Improved Flexibility, Longer Performance Life, Multi-Substrate Adhesion
- Functions
- Curing Agent
- Compatible Polymers & Resins
- Epoxies (EP)
- Safety
Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, the resin should be washed off immediately with soap and warm water. Avoid breathing vapors, mist or gas Please refer to the SDS for detailed safety instructions.
- Markets
- Automotive & Transportation
- Paints & Coatings
- Printing & Packaging
- PACKAGING
Lapox AH-711 is available in 200 kg MS | HDPE drums and 1,000 kg IBC. Other packing may be considered on request.
- Advantages
Good inter-coat adhesion High peel strength Improved flexibility Long working time Superior corrosion resistance
- Appearance
- Yellow, brown liquid
- Processing
- High speed dispersion for paints
- Coating Type
- Primer
- Solventborne Coating
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Handling
Lapox AH-711 should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a shelf-life of 1 year, if stored in its original container between 18°C and 25°C away from humidity and excessive heat. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling.
- Spills and Disposal
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.
- Certifications and Compliance
- ISO 14001
- Compatible Polymers and Resins
- Epoxies (EP)
- Compatible Substrates and Surfaces
- Metal
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Color | max. 9 | GS | ASTM D1544 |
| Amine value | 210 - 230 | mg KOH/g | ASTM D2073 |
| Viscosity at 40°C | 50,000 - 75,000 | m Pas | ASTM D2196 |
| Density at 20°C | 0.96 - 0.98 | g/cm3 | — |
| AHEW | 190 - 238 | g/eq | — |
| Recommended Ratio | 100 - 125 | w/w | — |
