LAPOX® AC-14
- CASE Ingredients Features
- Fast CureFast DryingFaster Cure Time
- Chemical Family
- Phenols & Phenolics
LAPOX® AC-14 is a chemically 2,4,6-tris(dimethyl aminomethyl) phenol. It is tertiary amine accelerator recommended to use along with other curing agents like polyamidoamides, amine adducts, mercaptans and anhydrides to increase cure speed. It improves cure of thin film and facilitate complete cure. The amount of Lapox AC-14 to be added into hardener depends on the speed of cure required.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Catalyst
Product families
- Catalysts & Initiators
Other characteristics
- Brand
- LAPOX
- Functions
- Catalyst
- Compatible Polymers & Resins
- Polyamides, Polyamines
- Safety
Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, the resin should be washed off immediately with soap and warm water. Avoid breathing vapors, mist or gas. Please refer to the SDS for detailed safety instructions.
- Markets
- Adhesives & Sealants
- Electrical & Electronics
- Paints & Coatings
- PACKAGING
Lapox AC-14 is available in 200 kg MS | HDPE drums and 1,000 kg IBC. Other packing may be considered on request.
- Advantages
Faster drying of films Increases cure speed Light colour
- Appearance
- Clear, yellow liquid
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications; Electrical & Electronics — Other Electrical & Electronics Applications; Paints & Coatings — Other Paints & Coatings Applications
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Recommended Dosage
- 0.5 - 10w/w
- Handling
Lapox AC-14 should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a shelf-life of 1 year, if stored in its original container between 18°C and 25°C away from humidity and excessive heat. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling.
- Spills and Disposal
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.
- Certifications and Compliance
- ISO 14001
- Compatible Polymers and Resins
- Polyamides
- Polyamines
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Color | max. 6 | GS | ASTM D1544 |
| Amine value | 580 - 635 | mg KOH/g | ASTM D2073 |
| Viscosity at 25°C | 150 - 300 | m Pas | ASTM D2196 |
