LAPOX® AH-411
- CASE Ingredients Features
- Good Blush ResistanceGood Color StabilityHigh GlossLow Viscosity
- Chemical Family
- Aliphatics, AminesAliphaticsAmines
LAPOX® AH-411 hardener is an ambient curing cycloaliphatic amine. Good color and color stability are the promising features of this curing agent, which produces films with non-blushing and excellent gloss.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Curing Agent
Product families
Applications
- Adhesives & Sealants — Other Adhesives & Sealants Applications; Paints & Coatings — Other Paints & Coatings Applications
- Other Flooring & Surface Applications
Product Families
- Functional Additives
Other characteristics
- Brand
- LAPOX
- End Uses
Sol-Gel Coating, Solventless & High Solids Coating
- Features
Good Blush Resistance, Good Color Stability, High Gloss, Low Viscosity
- Functions
- Curing Agent
- Compatible Polymers & Resins
- Epoxies (EP)
- Safety
Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, the resin should be washed off immediately with soap and warm water. Avoid breathing vapors, mist or gas. Please refer to the SDS for detailed safety instructions.
- Markets
- Adhesives & Sealants
- Building & Construction
- Paints & Coatings
- PACKAGING
Lapox AH-411 is available in 1 kg HDPE bottles. Other packing may be considered on request.
- Appearance
- Clear liquid
- Processing
- Resin Infusion Resin transfer moulding (RTM)
- Coating Type
- Sol-Gel Coating
- Solventless & High Solids Coating
- Technology
- CASE Ingredients
- Packaging Type
- Bottles
- Handling
Lapox AH-411 has shelf-life of 2 years if stored in their original sealed containers. Hardener may crystallise if stored below 15°C. Crystallisation may be reversed completely by heating the material between 60°C and 70°C. It is recommended to use resin and hardener only when they are clear and free from cloudiness. Hardener may cause irritation to sensitive skins. If contact does occur then it should be washed off immediately with soap and warm water. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling.
- Spills and Disposal
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.
- Certifications and Compliance
- ISO 14001
- Compatible Polymers and Resins
- Epoxies (EP)
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Color | max. 30 | AHPA | ASTM D1209 | ASTM D 5386 |
| Viscosity at 25°C | 10 - 20 | m Pas | ASTM D2196 |
| Density at 25°C | 0.89 - 0.90 | g/cm3 | ISO 1183 |
| Pot life (at 25°C for 100 g mix1) | 90 - 120 | Minutes | ASTM D1726 |
| Use level (With standard liquid epoxy resin of EEW 190) | 22 | PHR | — |
| Potential Tg by DSC | 140 - 155 | °C | DIN 11357-2 |
