LAPOX® AH-440
- CASE Ingredients Features
- Chemical ResistanceGood Blush ResistanceGood Mechanical PropertiesHigh GlossLow Viscosity
- Chemical Family
- Aliphatics, AminesAliphaticsAmines
LAPOX® AH-440 is a modified cycloaliphatic amine available in form of low viscous transparent liquid. It is suitable to cure epoxy resins at ambient temperature. It is recommended for solvent free coating, floor topping, and industrial maintenance coatings along with modified or unmodified epoxy resins based on Bisphenol-A|F. Appropriately cured mass will provide excellent glossy films coupled with good mechanical strength and chemical resistance properties.
Properties
- Physical Form
- Liquid
Identification
- CASE Ingredients Functions
- Curing Agent
Product families
Applications
- Adhesives & Sealants — Other Adhesives & Sealants Applications; Paints & Coatings — Other Paints & Coatings Applications
- Other Flooring & Surface Applications
- Industrial Coatings
Product Families
- Functional Additives
Other characteristics
- Brand
- LAPOX
- End Uses
- Solventless & High Solids Coating, Top Coat
- Features
Chemical Resistance, Good Blush Resistance, Good Mechanical Properties, High Gloss, Low Viscosity
- Functions
- Curing Agent
- Compatible Polymers & Resins
- Epoxies (EP)
- Safety
Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, the resin should be washed off immediately with soap and warm water. Avoid breathing vapors, mist or gas. Please refer to the SDS for detailed safety instructions.
- Markets
- Adhesives & Sealants
- Building & Construction
- Paints & Coatings
- PACKAGING
Lapox AH-440 is available in 200 kg MS | HDPE drums and 1,000 kg IBC. Other packing may be considered on request.
- Advantages
Excellent gloss Free from amine blush Low colour Low viscosity
- Appearance
- Clear liquid
- Processing
- Brush, roller or spray coating
- Cure
- Moisture Cure
- Coating Type
- Solventless & High Solids Coating
- Top Coat
- Technology
- CASE Ingredients
- Packaging Type
- Drums
- Handling
Lapox AH-440 should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a shelf-life of 1 year, if stored in its original container between 18°C and 25°C away from humidity and excessive heat. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling.
- Spills and Disposal
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.
- Certifications and Compliance
- ISO 14001
- Compatible Polymers and Resins
- Epoxies (EP)
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Color | max. 2 | GS | ASTM D1544 |
| Amine value | 335 - 375 | mg KOH/g | ASTM D2073 |
| Acid value | 8 - 12 | mg KOH/g | ASTM D1639 |
| Viscosity at 25°C | 150 - 300 | m Pas | ASTM D2196 |
| Pot life at 25°C (Pot life of 100 g mix mass. Mixing ratio with Lapox B-11 (EEW 190) : Lapox AH-313 is 100:12 w/w) | 25 - 40 | Minutes | ASTM D2471 |
| AHEW | 75 | g/eq | — |
| Recommended Ratio | 40 | w/w | — |
