MiraGard Colorbond XL
Miracote MiraGard Colorbond XL is a single component, 100% self-crosslinking pigmented acrylic coating specifically designed for use as a top coat for Miracote MPC, MiraFlex XL, MiraFlex II, MiraFlex ME and other Miracote products/systems. It can also be used as a protective coating over properly prepared conventional concrete and other types of construction substrates. MiraGard Colorbond XL exhibits a low sheen finish and provides excellent durability and weathering properties.
Product families
Applications
- Concrete Coatings & Stains
Product Families
- Top Coats
Other characteristics
- Brand
- MiraGard
- Features
Abrasion Resistant, Breathable, Durable, Fast Drying, Good Color Stability, Good Weather Stability, Moisture Resistant, UV Resistant, Wear Resistant
- Product Type
1K (1 component) Coating, Top Coat, Waterborne Coating; 1K (1 component) Coating; Top Coat; Waterborne Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete
- Usage
As a color top coat for many Miracote products/systems.; Stand-alone protective coating for concrete surfaces.; For use in recoating other acrylic-based topcoats.; Exterior and interior concrete and other surfaces.; Horizontal, vertical and overhead applications.
- Markets
- Paints & Coatings
- Mix Ratio
- Single component. Thoroughly mix prior to use.
- Limitations
Apply only to clean, relatively dry surfaces.; Must be applied only to properly prepared substrates.; Seven to ten days cure required for peak hot tire resistance.
- Technology
- Ready-to-Use Products
- Coverage Rates
250-300 sq. ft./gal @ 6.4 to 5.3 mils (wft) per coat.
- Packaging Type
- Pails
- Labeling Claims
- Environmentally Friendly
- For Best Results
Always install a minimum 4' by 4' test area or job site mock-up for owner approval of acceptable color, texture, finish, adhesion, and any other critical requirement prior to proceeding.; Always protect materials from excessive heat and cold, and precondition to room temperature as necessary.; Regularly check wet film thickness with a mil gage. Monitor consumption to ensure correct application rates are obtained.; The proper application of this product is the sole responsibility of the end user. Job site visits by Miracote representatives are only for observation and making recommendations, and do not assume any liability for supervision or quality control.; It is recommended to apply in two coats at the published coverage rates. Do not apply in one thick coat.; For enhanced chemical resistance, cleanability and stain resistance apply MiraGard HDWB clear acrylic sealer.; Measure substrate temperatures to ensure that material is applied when temperatures are between 50°F (4.5°C) and 90°F (32.2°C) during placement.
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids Content | 55.0 | % |
| Gloss 60° Gloss Meter | min. 75 | — |
| Flexibility | Excellent | — |
| Weathering | Excellent | — |
| Abrasion Resistance | Excellent | — |
| Curing Time (Dry to touch, 77°F) | 1.0 | hour |
| Curing Time (Re-coat, 77°F) | 4.0 | hours |
| Curing Time (Traffic, 77°F) | 24.0 | hours |
| Temperature Limit (Continous) | 180.0 | °F |
| Temperature Limit (Intermittent) | 255.0 | °F |
